Gigabyte GN-WP01GT manual Advanced Status Window

Page 19

Super G Wireless PCI Adapter

Click Advanced if you want to view more detailed status information for your client adapter. The Advanced Status window appears (see Figure 15).

Figure 15 – Advanced Status Window

Network Name (SSID) - The name of the network to which your client adapter is currently associated.

Server Based Authentication - The method by which authentication to a back-end server is being performed to establish secure connectivity. (None, LEAP, EAP-TLS, PEAP (EAP-GTC), or PEAP (EAP-MSCHAP V2))

Data Encryption - The data encryption type that was negotiated with the access point (in infrastructure mode) or another client (in ad hoc mode) upon association. (None, WEP, CKIP, or TKIP)

Authentication Type - Specifies whether the client adapter must share the same WEP keys as the access point in order to authenticate or can authenticate to the access point regardless of its WEP settings.

(Open or Shared)

Message Integrity Check - Indicates whether your client adapter is using message integrity check (MIC) to protect packets sent to and received from the access point.

MIC prevents bit-flip attacks on encrypted packets. During a bit-flip attack, an intruder intercepts an encrypted message, alters it slightly, and retransmits it, and the receiver accepts the retransmitted message as legitimate.

Associated AP Name - The name of the access point to which your client adapter is associated. It is shown only if the client adapter is in infrastructure mode.

19

Image 19
Contents Super G Wireless PCI Adapter Contents Super G Wireless PCI Adapter Important Note Overview Key FeaturesChapter IntroductionOperating Modes Package ContentsLED Activities Definition System RequirementsInstalling PCI Adapter Chapter InstallationAttach the high gain antenna Installing the Driver and UtilityWP01GT Welcome Screen Setup will detect your operating system Continue Anyway Windows Logo TestingNew Wireless Connection Icon SmartSetup 3 Network Selection SmartSetupSmartSetup 3 Define Passphrase Congratulations. Your secure WPA wireless LAN and Internet Using the Gigabyte Wireless Utility Chapter ConfigurationCurrent Status Tab Link Status Tab Advanced Status Window Page Site Survey Tab Site Survey TabProfile Management Tab Profile Management TabProfile Management General Tab Profile Management General TabProfile Management Security Tab Profile Management Security ScreenWEP key configuration Configure Pre Shared Key WEP SecurityEnter WPA Passphrase Leap Settings Password/Confirm Password Enter a password in both fieldsEAP-FAST Settings Using EAP-TLS, EAP-TTLS or Peap Define Certificate Window Enabling EAP-TTLSDefine EAP-TTLS Certificate Window Enabling Peap EAP-GTCEnabling Peap EAP Mschap User information for Peap GTC Authentication Enter your PeapDefine EAP Server Window Preferred Access Points Specify MAC Access Points Diagnostics TabTransmit Advanced Statistics Page Adapter Info Tab Adapter Information TabAppendix a What is Ad-hoc mode?What is Infrastructure mode? What is the Ieee 802.11g standard?Appendix B Wireless SecurityProblem 1 The WP01GT does not work correctly TroubleshootingAppendix C Auto-negotiate Appendix DGlossary Auto-MDI/MDIXIPSec FirewallGateway IP AddressRouter PPPoESubnet Mask Appendix E SpecificationsSubject to Change without Notices Regulatory Information Appendix FSuper G Wireless PCI Adapter Appendix G Warranty