Gigabyte GN-WP01GT manual Using EAP-TLS, EAP-TTLS or Peap

Page 29

Super G Wireless PCI Adapter

Use Saved User Name and Password - Does not require you to enter an EAP-FAST username and password each time the computer reboots. Authentication occurs automatically as needed using a saved username and password (which are registered with the RADIUS server).

User Name – Enter a username

Password/Confirm Password – Enter a password in both fields

Domain -- If you wish to specify a domain name that will be passed to the RADIUS server along with your username, enter it in the Domain field.

Include Windows Logon Domain with User Name -- If you work in an environment with multiple domains and therefore want your Windows login domain to be passed to the RADIUS server along with your username

Select the protected access credential (PAC) authority provisioning

zCheck the Allow Automatic PAC Provisioning for this Profile checkbox to have the system automatically provide the PAC for this profile.

zOR. To set a PAC authority, choose a PAC Authority from the drop-down list to use. Click the Select More button to import or delete a new PAC authority

Using EAP-TLS, EAP-TTLS or PEAP

Before you can enable EAP-TLS, EAP-TTLS or PEAP authentication, our network devices must meet the following requirements:

You must have a valid Windows username and password, and the password cannot be blank.

The appropriate certificates must be installed on your computer. EAP-TLS requires both a Certificate Authority (CA) certificate and a user certificate while EAP-TTLS or PEAP requires only a CA certificate.

If you want to enable EAP-TLS without WPA/WPA2, choose 802.1x under Set Security Options and EAP-TLS in the 802.1x EAP Type drop-down box. If you want to enable EAP-TLS with WPA/WPA2, choose WPA/WPA2 under Set Security Options and EAP-TLS in the WPA/WPA2 EAP Type drop-down box.

29

Image 29
Contents Super G Wireless PCI Adapter Contents Super G Wireless PCI Adapter Important Note Chapter Key FeaturesIntroduction OverviewOperating Modes Package ContentsLED Activities Definition System RequirementsInstalling PCI Adapter Chapter InstallationAttach the high gain antenna Installing the Driver and UtilityWP01GT Welcome Screen Setup will detect your operating system Continue Anyway Windows Logo TestingNew Wireless Connection Icon SmartSetup 3 Network Selection SmartSetupSmartSetup 3 Define Passphrase Congratulations. Your secure WPA wireless LAN and Internet Current Status Tab Chapter ConfigurationUsing the Gigabyte Wireless Utility Link Status Tab Advanced Status Window Page Site Survey Tab Site Survey TabProfile Management Tab Profile Management TabProfile Management General Tab Profile Management General TabProfile Management Security Tab Profile Management Security ScreenWEP key configuration Configure Pre Shared Key WEP SecurityEnter WPA Passphrase Leap Settings Password/Confirm Password Enter a password in both fieldsEAP-FAST Settings Using EAP-TLS, EAP-TTLS or Peap Define Certificate Window Enabling EAP-TTLSDefine EAP-TTLS Certificate Window Enabling Peap EAP-GTCEnabling Peap EAP Mschap User information for Peap GTC Authentication Enter your PeapDefine EAP Server Window Preferred Access Points Specify MAC Access Points Diagnostics TabTransmit Advanced Statistics Page Adapter Info Tab Adapter Information TabWhat is Infrastructure mode? What is Ad-hoc mode?What is the Ieee 802.11g standard? Appendix aAppendix B Wireless SecurityAppendix C TroubleshootingProblem 1 The WP01GT does not work correctly Glossary Appendix DAuto-MDI/MDIX Auto-negotiateGateway FirewallIP Address IPSecSubnet Mask PPPoERouter Appendix E SpecificationsSubject to Change without Notices Regulatory Information Appendix FSuper G Wireless PCI Adapter Appendix G Warranty