Gigabyte GN-WP01GT manual Configure Pre Shared Key WEP Security, WEP key configuration

Page 25

Super G Wireless PCI Adapter

Cells check box if the access point to which the client adapter is to associate (or the VLAN to which the client will be assigned) has WEP set to Optional and static WEP is enabled on the client adapter. Otherwise, the client is unable to establish a connection with the access point.

Uncheck the Allow Association to Mixed Cells check box if the access point to which the client adapter is to associate (or the VLAN to which the client will be assigned) does not have WEP set to Optional. This is the default setting.

None – no security is set. (Default setting)

Select the type of security encryption (WPA/WPA2, WPA/WPA2-Passphrase, WEP or RADIUS 802.1X) from the radio buttons, and click Configure. Depending on the security selected, the following Configure Security Screens will appear.

Configure Pre Shared Key (WEP) Security

To use WEP, select if you want Hex or ASCII method, enter a pre-shared key, select 64-bits, 128-bits, or 152-bits from the drop down box and click OK.

Note: ASCII text WEP keys are not supported on GIGABYTE Routers, you must choose the Hexadecimal (0-9,A-F) option if you are connecting with these Access Points.

Figure 20. WEP key configuration

WPA/WPA2-Passphrase - When you select WPA/WPA2, the target

802.11device must also be WPA/WPA2 enabled in order to communicate with each other. Obtain the WPA/WPA2 Passphrase for the access point from your system administrator and inter it in the WPA/WPA2 Passphrase field.

WPA/WPA2 Passphrase must contain 8 to 63 ASCII text characters or 64 hexadecimal characters.

Your client adapter's WPA/WPA2 Passphrase must match

25

Image 25
Contents Super G Wireless PCI Adapter Contents Super G Wireless PCI Adapter Important Note Chapter Key FeaturesIntroduction OverviewOperating Modes Package ContentsLED Activities Definition System RequirementsInstalling PCI Adapter Chapter InstallationAttach the high gain antenna Installing the Driver and UtilityWP01GT Welcome Screen Setup will detect your operating system Continue Anyway Windows Logo TestingNew Wireless Connection Icon SmartSetup 3 Network Selection SmartSetupSmartSetup 3 Define Passphrase Congratulations. Your secure WPA wireless LAN and Internet Using the Gigabyte Wireless Utility Chapter ConfigurationCurrent Status Tab Link Status Tab Advanced Status Window Page Site Survey Tab Site Survey TabProfile Management Tab Profile Management TabProfile Management General Tab Profile Management General TabProfile Management Security Tab Profile Management Security ScreenWEP key configuration Configure Pre Shared Key WEP SecurityEnter WPA Passphrase Leap Settings Password/Confirm Password Enter a password in both fieldsEAP-FAST Settings Using EAP-TLS, EAP-TTLS or Peap Define Certificate Window Enabling EAP-TTLSDefine EAP-TTLS Certificate Window Enabling Peap EAP-GTCEnabling Peap EAP Mschap User information for Peap GTC Authentication Enter your PeapDefine EAP Server Window Preferred Access Points Specify MAC Access Points Diagnostics TabTransmit Advanced Statistics Page Adapter Info Tab Adapter Information TabWhat is Infrastructure mode? What is Ad-hoc mode?What is the Ieee 802.11g standard? Appendix aAppendix B Wireless SecurityProblem 1 The WP01GT does not work correctly TroubleshootingAppendix C Glossary Appendix DAuto-MDI/MDIX Auto-negotiateGateway FirewallIP Address IPSecRouter PPPoESubnet Mask Appendix E SpecificationsSubject to Change without Notices Regulatory Information Appendix FSuper G Wireless PCI Adapter Appendix G Warranty