Black Box AC455A-TX-R2, AC456A-RX-R2 manual Signal Connections, Standalone Transmitter

FIBER LINK

Video In, Level/Loss LEDs

Command Out, Response In,

Sync Out LEDs

BNC

Fiber

Power

connection (see

Figure 3-2)

Figure 3-1. Standalone Transmitter.

3.2 Signal Connections

All fiberoptic links convert electrical signals into a light signal at the transmitter and convert the light back to electrical signals for output at the receiver. The electrical signal connections to the Fiber Link consist of a single BNC connector on the transmitter and receiver.

CAUTION

Make sure all the peripheral equipment that is to be connected to the fiber unit is turned off.

13