|
| FIBER LINK |
Table | ||
|
|
|
Indicator | Display | What It Means |
|
|
|
VIDEO (TX) | Green | Video coax input to link is good. Note that |
|
| even a totally black screen is a valid video |
|
| signal. |
|
|
|
| Red | Video coax input to link is not good. Check |
|
| the camera and the coax into the link. |
|
|
|
VIDEO (RX) | Green | Valid video signal received. Note that even a |
|
| totally black screen is a valid video signal. |
|
|
|
| Red | No video signal received. Check the camera |
|
| and coax. Check the LEVEL/LOSS |
|
| indicator. If the LEVEL/LOSS indicator is |
|
| green, check the video indicator on the TX |
|
| unit. |
|
|
|
COMMAND | Green | Indicates PTZ command transmission |
|
| (>250 mV). |
|
|
|
| Dark | No activity, or command being transmitted is |
|
| <250 mV. |
|
|
|
RESPONSE | Green | Indicates response from camera >250 mV. |
|
|
|
| Dark | No response from camera or signal is |
|
| <250 mV, may indicate a problem with the |
|
| camera. This function is not commonly |
|
| available in all systems. |
|
|
|
SYNC | Green | Indicates transmission of Genlock |
|
| Synchronization signals (>2V), where |
|
| applicable. |
|
|
|
| Dark | No Genlock signal being sent, or signal is |
|
| <2V. |
|
|
|
17