Black Box AC455A-TX-R2, AC456A-RX-R2 manual System Power, ALARM/+5VDC Ground

FIBER LINK

POWER +12~16VDC 3

ALARM/+5VDC 2

GROUND 1

Figure 3-2. Electrical Connection.

4.Seat the connector in its position in the fiber unit.

5.Plug the power supply into a suitable outlet.

3.5System Power

Power up the peripheral equipment. You’ll need to verify system operation. You can do this by observing video on the monitor at the receiver end, or by operating all of the pan-tilt-zoom functions controlled by the up-the-coax data signal. If any feature of the system does not perform as expected, refer to Table 4-1for a explanation of how to diagnose system faults using the built-in LEDs.

15