Freecom Technologies FHD-1 manual Driver installation only Windows 98 SE

GB

3

FREECOM FHD-1

CHAPTER 3: Driver installation (only Windows 98 SE)

Note: Your Freecom FHD-1 is fully backwards compatible with USB 1.1. The installation for USB 1.1 is the same as described below for USB 2.0.

1.Insert the Freecom Manual and driver CD into the CD-ROM drive.

2.Connect your Freecom FHD-1 to the USB connector of your notebook or computer.

3.The"AddNew HardwareWizard"opens anda"USB 2.0 Device"(USB 2.0 PCI Host Controller) or a "USB2-IDE Controller" (USB 1.1 connector) is found.

Click on "Next".

4.In the next window select "Search for the best driver for your device. (Recommended)". Click on "Next".

5.Make sure that the checkbox "CD-ROM drive" is activated in the next window.

12