Freecom Technologies manual Creating a partition on the FHD-1 under Windows 98 SE / ME

Creating a partition on the FHD-1 under Windows 98 SE / ME

5.3.2 Creating a partition on the FHD-1 under Windows 98 SE / ME

The following steps will guide you the process of creating partitions on your FHD-1 under Windows 98SE/ME. After this procedure your Freecom FHD-1 will be ready for use and it will be allocated a drive letter.

1.Click on the "Start" button.

2.Select "Run".

3.Enter "fdisk" and confirm with "OK".

4.Answerthequestion"Doyouwishtoenablelargedisksupport?"bypressing the 'Return' key. FAT32 is now activated.

5.Choose Option "5 (Change current fixed disk drive)" by pressing '5' and 'Return'.

6.Select the hard disk by its number where the "Usage" contains no value but onlyapercentsymbol.Selectthenumberofthecorrespondingharddiskand confirm by pressing the "Return" key.

Now your hard disk is activated and ready to be partitioned.

GB

5

31