Freecom Technologies FHD-1 manual Troubleshooting

	Troubleshooting
CHAPTER 6: Troubleshooting
Issue	Solution
After I connected the FHD-1 to my	• Install the Freecom SYNC 1.0
computerforthefirsttimenoFreecom	software and safely remove and
SYNC folder has been created	reconnect the FHD-1
automatically.	• Follow the instructions on chapter
	4.3 Creating a new SYNC folder.
After installation of Freecom SYNC 1.0,	• ConnecttheFreecomFHD-1toyour
the message "No Freecom FHD-1	computer.
external hard drive found." appears.	• Check all connections between the
	Freecom FHD-1, the power supply
	and the computer.
	• Safely remove and reconnect the
	Freecom FHD-1.
Files, deleted in the SYNC folder, are	You have to "Split From Original" the
still appearing during the syn-	files from their counterparts before
chronization.	you may delete them. Please refer to
	chapter 4.4.6 Handling deleted files.
An empty folder is not synchronised.	Empty folders are not taken into
	account during synchronization.
If you are working with the program	The SYNC folder is opened by another
"WindowsCommander"andareusing	program. Please close all applications,
the "send to" dialog to add items to	which are using the SYNC folder.
the SYNC folder, the message "The
briefcase is in use on another
computer" could appear.
You cannot create a SYNC folder with	This happens only under Windows 98.
a name you used for another, deleted,	Please restart Windows 98. After
SYNC folder.	restart, you can create the new SYNC
	folder.
Not enough memory on the target	Delete files on the target drive (FHD-1)
drive (FHD-1) during creation of SYNC	or select less files.
folder.
Not enough memory on the target	Delete files on the target drive (FHD-1).
drive (FHD-1) during synchronization.

GB

5

41