Freecom Technologies manual Daily use of the FHD-1 with Freecom Sync software, LED 1 Syncled

GB

4

FREECOM FHD-1

CHAPTER 4: Daily use of the FHD-1 with Freecom SYNC software

4.1 The SYNC button and status of LEDs

The FHD-1 is equipped with a SYNC button which enables you to synchronize files between your workstation and the FHD-1 (and vice versa).

The synchronization process will start by simply pressing one single button. The SYNC button only works when the Freecom SYNC 1.0 software is installed on your computer. Please refer to chapter 1 (Installation of the Freecom SYNC software) for software installation instructions.

Status of LEDs

LED 1 SYNCLED LED 2

The Freecom FHD-1 has three blue front LEDs to indicate its status:

LED1: The LED1 on the left front side of the Freecom FHD-1 indicates that a read or write access takes place.

SYNC LED: The SYNC LED located in the SYNC button shows the status of the Freecom SYNC 1.0 software (see table on the next page for more information).

LED2: The LED2 on the right front side indicates that the Freecom FHD-1 is powered and ready for use.

14