Recording a Source
Recording a Source
1Select a source to be recorded by pressing one of the INPUT SELECTOR buttons.
2Start recording on the cassette tape deck connected to TAPE REC jacks.
<The volume and tone control have no effect on the recording signals.
<The analog signals input from the EXTERNAL IN jacks cannot be recorded.
Dubbing from VIDEO 2 or 3 to VIDEO 1
1Select VIDEO 2 or 3 by pressing the VIDEO button (or the VIDEO 2 or 3 button of the remote control unit).
2Start recording on the VCR connected to VIDEO 1 REC jacks.
3Start playback on the VCR connected to VIDEO 2 or 3 INPUT jacks.
The audio and video signals input from VIDEO 2 or 3 are output from VIDEO 1 REC jacks.
<Copy protected DVD discs cannot be dubbed.
Dubbing the audio and video signals separately
While dubbing the video signal of VIDEO 2 or 3, you can replace the sound from VCR with the sound from an audio source such as CD.
1Select the video source to be recorded using the VIDEO button (or the VIDEO 2 or 3 button of the remote control unit).
2Select the audio source to be recorded (CD, TUNER or AUX) using the AUDIO button (or the corresponding buttons of the remote control unit).
3Start recording on the VCR connected to VIDEO 1 REC jacks.
4Start playback of the video and audio source to be recorded.
The picture from the video component appears on the TV, and the sound from the audio component is output from the speakers.
19