DOLBY PRO LOGIC II parameters
You can adjust the parameters for DOLBY PRO LOGIC II MUSIC.
1Select DOLBY PRO LOGIC II MUSIC by pressing the SURROUND MODE button ( 
or 
).
2Press the SURROUND PARAMETER button to change the parameter.
Each time the SELECT button (5 or b) is pressed, the parameter is changed as follows:
PANO 
C.WIDTH 
DIMEN
3Within 5 seconds, press the SELECT button (g or t) to change the value.
PANO (panorama):
This mode extends the front stereo image to include the surround speakers for an exciting wraparound effect with side wall imaging. Select “ON” or “OFF”.
The default setting is “OFF”.
C.WIDTH (center width):
This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom image, or from all three front speakers to varying degrees.
The adjustable range is from 0 to 7. The default setting is “3”.
DIMEN (dimension):
This adjusts the
Repeat step 2 and 3 to adjust other parameters.
When all the configurations have been finished, leave the unit idle for 5 seconds to exit.
23