Teac AG-D8850 owner manual Setup, Use the Select buttons 5/b/g/t to navigate the menus

Page 28

Setup

The setup menu appears on the front panel’s display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.

The setup menu consists of 5 main menus; SYSTEM, INPUT, SPK SET, CH LEVEL and PARAMTR. These menus are then divided up into various sub-menus.

1Turn on the main unit during standby.

2Press the SETUP button to enter the setup menu.

“SYSTEM” appears on the front panel display.

<To exit the setup menu, press the SETUP button again.

3Use the SELECT buttons (5/b/g/t) to navigate the menus.

<Refer to the Setup Menu Chart on the next page.

4Press the ENTER button to confirm the entry.

<When a numerical value (such as speaker distance) is changed, the value is confirmed without pressing the ENTER button.

<Individual menu functions are described on pages 30-33.

<Repeat steps 3 and 4 as required.

5Exit the setup menu by pressing the SETUP button once more.

28

Image 28

Contents AG-D8850 For European customers Disposal of your old applianceContents Before UseFM Indoor Antenna Connection FM antennaFM Outdoor Antenna How to connect Connection AM antennaAM Indoor Loop Antenna AM Outdoor AntennaConnection DVD, CD, etcAC outlet DVD player or Decoder TV MonitorAC Outlet switched AC Power CordDigital in terminals Audio IN/OUT jacksCD player Cassette tape deck, MD deck, etcExample Connection to Video Cassette Recorders How to connect Speaker ConnectionsRestoring factory settings Positioning of the SpeakersRemote Control Unit Names of Each ControlFront Panel and Remote Control Unit Use this button to set sleep timer Use this button to scan preset channelsNumeric buttons Use this button to dim or turn off the displayRemote Control Unit Battery InstallationBattery Replacement Precautions concerning batteriesPress the Power switch Basic OperationHeadphones Speaker On/OffExternal in 6 channel direct input MutingSleep Timer DimmerSleep 10 20, 30, 40, 50, 60, 70, 80 Normal displayDubbing the audio and video signals separately Recording a SourceRecording a Source Dubbing from Video 2 or 3 to VideoSurround Mode Auto defaultWhen the source is Dolby Digital 5.1-channel When the source is Dolby Digital 2-channelDolby Digital DTS DTS Digital SurroundDolby Pro Logic Stereo Mode Dynamic Range CompressionDolby PRO Logic II parameters Dimen dimensionWidth center width Select Tuner by pressing the FM/AM button TunerSelect the station you want to listen to auto selection Preset Tuning Presetting StationsHow to select preset stations Scanning preset stationsPS Program Service name RDS SearchPTY Program Type CT Clock TimeTP search RDS searchPTY search Setup Exit the setup menu by pressing the Setup button once moreUse the Select buttons 5/b/g/t to navigate the menus Press the Enter button to confirm the entrySetup Menu Chart Distance UnitSettings System Settings InputSubwoofer Setting Norm defaultSettings Speaker Setup Speaker Configuration ConfigSpeaker distance Distance Crossover frequencySettings Channel Level Settings ParametersTest Tone Balancing relative volume between speakers using Test TonePress the Tone button Troubleshooting MaintenanceSpecifications Teac Corporation