The DVD-V888N is equipped with the following audio outputs:
1.AC-3/DTS digital output (optical and coaxial)
2.Mix audio output – Left & Right
3.Scart output (European version only)
For AC-3 surround output, connect the DVD-V888N digital output (optical or coaxial) to an amplifier with a built-in AC-3 decoder.
For DTS surround output, connect the DVD-V888N digital output (optical or coaxial) to an amplifier with built-in DTS decoder
When the AC-3/ DTS digital output option is selected, an AC-3/DTS decoding-capable amplifier is required. The Audio Setup – Digital Output option in the Setup menu should be set to Encoded Digital, NOT Analog/DPCM. Change this setting when necessary.
1.Press the Setup button.
2.Press ▼ button to navigate to the Options icon & Audio setting.
3.Press 
Enter to select the Encoded Digital option.
4.Click Save when done
For analog audio output, choose the Analog/DPCM audio option, and make sure the DVD-V888N’s Audio Out jack is connected to the Analog Audio Input of your AV system.
For digital audio output, choose the Encoded Digital option, and make sure the DVD-V888N’s Audio Out jack is connected to the Digital Audio input (optical or coaxial) of your AV system.
- 28 -
