Apple V888N instruction manual Troubleshooting, General Issues, Audio Issues

Troubleshooting

The following are a list of difficulties you may experience when using the DVD-V888N. Attempt the most common solutions provided below before calling for customer service.

General Issues

Symptom	Possible solutions
No power	Verify that the power cord is firmly plugged into a working electrical outlet.
	Verify that the DVD-V888N main power switch is turned on.
DVD-V888N does not	Aim the remote control directly at the front panel sensor.
respond to the remote	Remove any obstacles between the player and the remote control.
control
	Install new batteries in the remote control.
Panel buttons do not	Verify that the DVD-V888N is not in initial Setup mode. Reset the player by
work	unplugging the AC cord from the electrical outlet.
Disc doesn’t play	Verify that the disc label is facing up. Clean the disc, if necessary.
properly, or at all	Try a different disc; the disc in question may be defective. Check for scratches
	or warps.
DVD-V888N does not	The disc may not enable certain operations.
respond to some	Refer to the disc manual for its capabilities.
operating commands
during playback

Audio Issues

No sound or incomplete	Check audio connections and audio setup.
sound output	Verify that the TV and amplifier/receiver connections are secure, and that they
	are powered on, and set to the correct audio format.
	Press the Audio button to select other audio tracks. The disc or track may be
	defective.
	Verify that the Mute function of the DVD-V888N, TV or amplifier is not
	active.
	The following operations disable sound output: reverse play, pause, step, slow,
	and search. This is normal.
No audio at digital	Verify that the digital connections are secure, and that the Settings menu shows
output	that digital output is set to ALL or PCM.
	Verify that the audio format of the selected audio language matches your
	amplifier/receiver capabilities.
	Not applicable for MP3

- 56 -