Apple V888N Getting Started, Package Contents, Remote Control Battery Installation

Getting Started

1.Read through this instruction manual.

2.Unpack the unit.

3.Load batteries into the remote control.

4.Connect the DVD-V888N to your audio/video system properly.

5.Plug the DVD-V888N (and other connected A/V devices) into an electrical outlet and turn power on.

6.Verify your DVD-V888N/TV/amplifier settings for audio and video.

7.Install Media Center server software in your PC.

Package Contents

The standard DVD-V888N package contains the following items:

ƒDVD-V888N DVD player

ƒRemote control (with batteries)

ƒAC power cord

ƒAV cables

ƒUser's instruction manual

ƒSoftware CD

Remote Control Battery Installation

Batteries are packaged separately from the remote control. To load them into the remote control, remove the battery compartment cover first. Load “CR2025” batteries into the battery compartment. Position the + and – symbols on the batteries in the same orientation as the image of the batteries on the compartment. Remove the batteries if the remote control will not be used for a long period of time.

- 6 -