Apple V888N instruction manual

Warning

TO REDUCE THE RISK OF FIRES AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION: To reduce the risk of fire and electric shock, do not remove the cover of this product. Refer all maintenance requests to authorized personnel only.

This lighting flash arrow symbol in a triangle alerts users to the presence of non-insulated high voltage within the product's enclosure that present an electrical shock hazard.

The exclamation point symbol in a triangle alerts users to the presence of important operating and maintenance instructions in the literature accompanying this product.

The mark, displayed on the rear panel of the unit, indicates that the unit is a Class 1 device that uses lasers. No radiation hazard exists.

ƒRead through this instruction manual before installing and using the DVD-V888N.

ƒOnly qualified personnel should service the DVD-V888N.

ƒDo not touch the power plug with wet hands.

ƒPull the plug, not the cord, to disconnect the DVD-V888N from an electrical outlet.

ƒTurn the main power off when the DVD-V888N is not in use. Disconnect the power plug if you do not intend to use the DVD-V888N for a long period of time.

ƒBefore moving the DVD-V888N, first remove the disc from the unit's tray.

ƒDo not open the cover or touch any of the components inside the unit.

ƒDo not install or operate the unit when it is directly exposed to sunlight or other objects that radiate heat -- the DVD-V888N may overheat and malfunction.

ƒInstall the DVD-V888N in a cool, dry location. High moisture and humidity may damage the laser head.

ƒInstall the DVD-V888N on a flat surface with good air circulation. Do not cover or obstruct the ventilation holes on the unit in any way -- the DVD-V888N may overheat.

ƒClean the DVD-V888N by wiping the panel and case with a soft dry cloth. Do not apply any kind of thinner, alcohol or sprays.

- 3 -