English | CONTROLS |
BASIC FUNCTIONS
SUPPLIED ACCESSORIES
— AC mains lead
TOP AND FRONT PANELS (See 1)
1p — 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted when headphones are connected to the set.
2AUX — 3.5 mm
3STANDBYy — power on/ off switch
4Source selector — selects CD/ TUNER/ AUX/ TAPE function
5IR Sensor — infrared sensor for remote control
6 Cassette recorder keys RECORD 0 — starts recording PLAY 1 — starts playback
SEARCH 5/6 — fast winds/rewinds tape STOP/OPEN 9/
—opens the cassette compartment
—stops the tape
PAUSE ; — pauses playback or recording
7OPEN•CLOSE - press to open/close CD door
8DBB selector — Switches the bass enhancement on / off
9VOLUME — adjusts volume level
0 Band selector— selects wavebands
! Navigation controls
PRESET
9 — stops CD playback;
—erases a CD programme
SEARCH ∞, § —
CD: — searches back and forward within a track;
—skips to the beginning of a current track/ previous/ later track
Tuner: tunes to radio stations (down, up). MODE — selects different play modes: e.g. REPEAT or SHUFFLE (random) order 2; — starts or pauses CD playback
@PROGRAM —
CD: programmes tracks and reviews the pro- gramme;
Tuner: programmes preset radio stations
#Display — shows the status of the set
BACK PANEL
$Telescopic aerial — improves FM reception % AC MAINS — inlet for mains lead
^ Battery compartment — for 6 batteries, type
REMOTE CONTROL
1VOLUME +, – — adjusts volume level (up, down)
2 SHUFFLE — plays all CD tracks in random order 3 2; — starts/ pauses CD playback
4 SEARCH 5, 6 — searches backwards/ forwards within a track
5 PRESET 3,4 – — selects a preset radio station (up, down)
6 TUNING ∞, § — tunes to tuner stations (down, up)
7 9 — stops CD playback;
—erases a CD programme
8¡, ™ — skips to the beginning of a current track previous/ subsequent track
9REPEAT — repeats a track /programme/ entire CD
CAUTION
Use of controls or adjustments or performance of pro- cedures other than herein may result in hazardous radiation exposure or other unsafe operation.
IMPORTANT!
For users in the U.K.: please follow the instructions on the upper
MAINS SUPPLY
Whenever convenient, use the mains supply to con- serve battery life. Make sure you remove the power plug from the set and wall socket before inserting batteries.
Batteries (not included)
¥Insert 6 batteries, type
Remote control (See A)
¥Insert 2 batteries, type AAA, R03 or UM4 (prefer- ably alkaline).
Incorrect use of batteries can cause electrolyte leak- age and will corrode the compartment or cause the batteries to burst.
¥Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set.
•When inserting new batteries, do not try to mix old batteries with the new ones.
¥Batteries contain chemical substances, so they should be disposed of properly.
Using AC Mains
1Check if the mains supply, as shown on the type plate located on the bottom of the set, corre- sponds to your local mains supply. If it does not, consult your dealer or service centre.
2If your set is equipped with a voltage selector, adjust the selector so that it matches with the local mains.
3Connect the mains lead to the wall socket.
4To disconnect the mains supply, unplug the set from the wall socket.
Auto-Standby mode
When a CD has reached the end of playback and remains in the stop position for more than
15 minutes, the set will switch off automatically to save mains.
When in pause position for 5 minutes, the CD play- back will stop automatically. 15 minutes later, the set switches off.
The type plate is located on the bottom of the set.
BASIC FUNCTIONS
Switching on and off and selecting function
1Press STANDBY y on the set to switch on.
2Press Source selector once or more to select: CD,
TUNER, AUX or TAPE function.
3Press y to switch off the set.
Helpful hints:
– To change from TAPE to CD,TUNER or AUX function, or when you are switching off the set: first, make sure you press the tape STOP 9 key to end play- back and all the cassette keys are released.
– The tone, sound settings, tuner presets and the volume level (up to a maximum volume level of 20) will be retained in the set’s memory.
Volume adjustment
¥Adjust the volume with the VOLUME control.
™Display shows the volume level and a number from
Bass adjustment
There are three DBB (Dynamic Bass Boost) options:
¥Press DBB Selector once or more to select your option.
™DBB1,2 appears if DBB is activated.