Apple 15AV manual Connecting the monitor’s base, You’re finished connecting the base

Page 12

Connecting the monitor’s base

1

2

3

4

The monitor and base are packaged separately. To connect the monitor’s base, follow these steps:

Place the monitor on its left side on a table or other firm surface.

Place the base on its side facing the bottom of the monitor.

Hook the rear latches into the holes at the rear of the monitor.

Insert the front latches into the slots at the front of the monitor.

First, hook the rear latches into the holes at the rear of the base.

Then, snap the front latches into the slots.

5Turn the monitor upright.

You’re finished connecting the base.

6Chapter 1

Image 12

Contents Multiple Scan 15AV Display Apple Computer, Inc Contents Adjusting the Picture Communications regulation information Vcci statement Setting Up Important safety instructionsWhat about electromagnetic emissions? Getting ready to set up Your Multiple Scan 15AV Display at a glance Choosing a good location for your monitor Connecting the monitor’s base You’re finished connecting the basePositioning the monitor Shoulders relaxedUsing more than one monitor Do you need a video card?Do you need an adapter? Connecting the monitor to your computer Monitor port icon Monitor cable Connecting headphones to your monitor Turning the monitor onTo turn on the monitor for the first time Installing the display software Disk’s icon appears on the desktopInstaller screen appears Page Using the Display Software About the Control StripWorking with the Control Strip Changing screen resolution Window opens showing all the control panelsMake the following choices in the control panel Other things you can do with the Monitors control panel Conserving energy What happens after you turn on the energy-saving feature Using Energy Saver with a screen saverUsing ColorSync ColorSync control panel appearsConfiguring the Control Strip Showing and hiding the Control StripTo show or hide the Control Strip, follow these steps Control Strip control panel appearsChange takes effect immediately Changing the font in Control Strip menus Box appearsChapter Adjusting the Picture Accessing the monitor’s controlsMaking adjustments to the picture Adjusting the brightness of the pictureAdjusting the contrast of the picture Adjusting the center of the pictureAdjusting the size of the picture Resetting controls to the factory settings Adjusting the sound volumeTips and Troubleshooting Care and cleaningTroubleshooting To clean the screen of the monitorProtecting your monitor from theft Monitor’s power indicator light doesn’t come on Screen is dark or appears dim No colors appear on the screen After many hours of use, the screen image appears dim You can’t control the sound volume of a CD After you change the screen resolution, icons move Multiple scan Resolution range 640 x 480 to 1024 x Red, green, and blue signals separate syncAdjusted at the factory for the following standard modes Voltage Volts Frequency 50/60 hertz Hz Power Watts W maximumApproximately 30 pounds 13.5 kilograms Operating 20% to 95%Pin miniature D-type connector Pin Output signalApple Computer, Inc