Apple 15AV manual Connecting headphones to your monitor, Turning the monitor on

Page 17

Connecting headphones to your monitor

If you wish, you can plug a pair of headphones (or other sound output device) into the Multiple Scan 15AV Display. To plug your headphones into the monitor, follow these steps:

1If your headphones are attached to the sound output port (marked by -) on the back of your computer, unplug them.

2If the sound cable that came with the Multiple Scan 15AV Display is not connected,

connect it to the sound output port on the computer and on the monitor. (Both sound output ports are marked by -).

3Plug the headphones into the headphone port (marked by f) on the front of the monitor.

When headphones are plugged in, you do not hear sound through the stereo speakers. Sound and music play through the headphones only.

Turning the monitor on

To turn on the monitor for the first time:

1Start up your computer.

2Press the Power button on the front right side of the monitor.

Power indicator light	Power button
f	I

The green power indicator light goes on.

If the green light does not go on, press the power switch again. If this doesn’t work, make sure you’ve connected the monitor to your computer properly (see “Connecting the Monitor to Your Computer,” earlier in this chapter) and make sure the monitor is plugged into a working electrical outlet. Also, make sure your computer is turned on.

Setting Up

11

Image 17

Contents Multiple Scan 15AV Display Apple Computer, Inc Contents Adjusting the Picture Communications regulation information Vcci statement Important safety instructions Setting UpWhat about electromagnetic emissions? Getting ready to set up Your Multiple Scan 15AV Display at a glance Choosing a good location for your monitor You’re finished connecting the base Connecting the monitor’s baseShoulders relaxed Positioning the monitorDo you need an adapter? Using more than one monitorDo you need a video card? Connecting the monitor to your computer Monitor port icon Monitor cable To turn on the monitor for the first time Connecting headphones to your monitorTurning the monitor on Disk’s icon appears on the desktop Installing the display softwareInstaller screen appears Page About the Control Strip Using the Display SoftwareWorking with the Control Strip Window opens showing all the control panels Changing screen resolutionMake the following choices in the control panel Other things you can do with the Monitors control panel Conserving energy Using Energy Saver with a screen saver What happens after you turn on the energy-saving featureColorSync control panel appears Using ColorSyncShowing and hiding the Control Strip Configuring the Control StripTo show or hide the Control Strip, follow these steps Control Strip control panel appearsChange takes effect immediately Box appears Changing the font in Control Strip menusChapter Accessing the monitor’s controls Adjusting the PictureAdjusting the brightness of the picture Making adjustments to the pictureAdjusting the contrast of the picture Adjusting the center of the pictureAdjusting the size of the picture Adjusting the sound volume Resetting controls to the factory settingsCare and cleaning Tips and TroubleshootingProtecting your monitor from theft TroubleshootingTo clean the screen of the monitor Monitor’s power indicator light doesn’t come on Screen is dark or appears dim No colors appear on the screen After many hours of use, the screen image appears dim You can’t control the sound volume of a CD After you change the screen resolution, icons move Red, green, and blue signals separate sync Multiple scan Resolution range 640 x 480 to 1024 xVoltage Volts Frequency 50/60 hertz Hz Power Watts W maximum Adjusted at the factory for the following standard modesOperating 20% to 95% Approximately 30 pounds 13.5 kilogramsPin Output signal Pin miniature D-type connectorApple Computer, Inc