Tripp Lite UPS SNMPWEBCARD Chapter Introduction, Snmpwebcard System Requirements

Page 3

Chapter 1 Introduction

Congratulations on the purchase of your new SNMPWEBCARD. Your SNMPWEBCARD will connect your UPS to your LAN. This will allow you to monitor and control the UPS from any PC on the LAN, using either:

•SNMP protocol and popular SNMP network management platforms such as HP OpenView, IBM NetView, etc., or

•A Web browser.

SNMPWEBCARD System Requirements

•Tripp Lite UPS with a standard card slot.

•Ethernet networking environment using the TCP/IP protocol.

•SNMP-based management station such as:

HP OpenView,

IBM Tivoli

Sun SunNet Manager,

Novell ManageWise

•Web browser supporting HTML frames, forms and Java, such as: Netscape Navigator 3.0 or later

MS Internet Explorer 4.0 or later

•For “Terminal Mode” configuration, a terminal emulation (communication) package.

Image 3

Contents UPS Snmpwebcard Table of Contents Snmpwebcard System Requirements Chapter IntroductionItem Description Snmpwebcard DetailsPackage Contents Selecting an IP Address Chapter ConfigurationTerminal Mode Configuration Setting ValueManaging the UPS Snmp ChapterNavigating the Snmpwebcard Web Pages Chapter Browser InterfaceEstablishing a Connection To Log On to the UPS AdapterMenu Bar Device InformationDevice Summary Alarm Status Action MenuAvailable Actions Loads Screen LoadsDevice Settings MenusContacts EventsContact Settings Menu Network Configuring Snmp Trap DestinationsSnmp Menu TCP/IP MenuTelnet Menu Web Menu10 Set Date/Time System12 Event Logs Event LogsProblem Solution Unable to perform Snmp set operations Chapter TroubleshootingProblem IP Address of the Snmpwebcard is unknown Solution Problem Unable to perform Snmp get operations SolutionEnvironmental Specifications Appendix a SpecificationsName Description PS/2 ConnectorPS/2 Connector Pins Serial Port Adapter Card