Tripp Lite UPS SNMPWEBCARD instruction manual Chapter, Snmp

Page 8

SNMP Adapter User’s Guide

Chapter 3 SNMP

Your SNMPWEBCARD allows a UPS to be managed by SNMP tools, using the UPS SNMP Agent and the UPS SNMP MIB.

The UPS SNMP Agent is in the SNMPWEBCARD SNMP firmware. It responds to standard SNMP commands (get, get next and set) and will generate SNMP traps (messages) if configured to do so.

The MIB (Management Information Base) determines what parameters can be monitored and controlled.

MIB (Management Information Base)

The UPS SNMP MIB must be installed on each management station that will monitor the UPS.

To Install The MIB:

•Copy the .MIB file from CD or download to a directory on your system.

•Use the Import-Compilecommand of your SNMP Management program to import the .MIB file.

Image 8

Contents UPS Snmpwebcard Table of Contents Chapter Introduction Snmpwebcard System RequirementsSnmpwebcard Details Item DescriptionPackage Contents Chapter Configuration Terminal Mode ConfigurationSetting Value Selecting an IP AddressManaging the UPS Chapter SnmpChapter Browser Interface Establishing a ConnectionTo Log On to the UPS Adapter Navigating the Snmpwebcard Web PagesDevice Summary Menu BarDevice Information Available Actions Alarm StatusAction Menu Loads Loads ScreenSettings Menus DeviceEvents ContactsContact Settings Menu Configuring Snmp Trap Destinations NetworkTCP/IP Menu Telnet MenuWeb Menu Snmp MenuSystem 10 Set Date/TimeEvent Logs 12 Event LogsChapter Troubleshooting Problem IP Address of the Snmpwebcard is unknown SolutionProblem Unable to perform Snmp get operations Solution Problem Solution Unable to perform Snmp set operationsAppendix a Specifications Environmental SpecificationsPS/2 Connector PS/2 Connector PinsSerial Port Adapter Card Name Description