Tripp Lite BP36V27, AGSM1200PSR3HG, AGSM700PSR3HG Buttons, For SmartPro Models Only-POWER Button

Page 5

Basic Operation

Note! Although some operational features and functions are common to all models, some operational features vary depending on whether you are operating a SmartPro model or an OmniSmart model.

Buttons

For SmartPro Models Only—“POWER” Button:

•To turn the UPS ON: with the UPS plugged into a live AC wall outlet,* press and hold the POWER button for about two seconds.** Release the button. If utility power is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply power for a limited time from its batteries***) by pressing and holding the POWER button for about two seconds.**

•To turn the UPS OFF: with the UPS ON and receiving utility power, press and hold the POWER button for one second.** Then unplug the UPS from the wall outlet. The UPS will be completely OFF.

*After you plug the UPS into a live AC outlet, the UPS will automatically charge its batteries, but will not supply power to its outlets until it is turned ON. ** The alarm will beep once briefly after the indicated interval has passed. *** If fully charged.

For OmniSmart Models Only—“UPS/STANDBY” Button:

Use the UPS/STANDBY button to do three things:

Switch your UPS’s Operating Mode: While your UPS is plugged into a live AC outlet, press the UPS/STANDBY button and hold it until you hear a beep (about 2 seconds) to toggle between the following operating modes. Choose your UPS’s operating mode based on the regional guidelines in Step 3 of the Quick Installation section.

•UPS Mode: ENABLES battery backup. UPS Conditions: While receiv- ing adequate utility line power, the UPS supplies power to its AC recep- tacles and charges its batteries; its “POWER” indicator light will be lit. If the utility line power fails or becomes inadequate, the UPS will supply inverted AC power to its receptacles if its batteries are sufficiently charged. Setting Advantages: Provides battery backup during blackouts or brownouts.

•STANDBY Mode: DISABLES battery backup. UPS Conditions: While receiving adequate utility line power, the UPS supplies power to its AC receptacles and charges its batteries; the “POWER” indicator light will be flashing. Setting Advantages: Continues to charge the battery when power is present while turning OFF the inverter to prevent battery deple- tion during power outages when equipment is not in use.

Cold-Start Your UPS: You may “cold start” your UPS and use it as a stand-alone power source when utility power is not present, providing that the UPS battery is charged. To “cold start” your UPS, press and hold the UPS/STANDBY button until you hear a beep (about 2 seconds), then release it. The “BATTERY CHARGE/BATTERY POWER” indicator light will illuminate and AC power inverted from stored battery power will be provided at the UPS receptacles.

Shut Down Your UPS: Press and hold the UPS/STANDBY button when AC line power is absent (i.e. during a blackout, or when the UPS is unplugged) to deactivate your UPS.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Hospital-Grade Plugs Receptacles Medical Grade UPS SystemsUPS Systems with UPS Location Warnings Important Safety InstructionsFor OmniSmart Models Only Serial Communications Quick Installation optionalUSB Communications Tel/DSL ProtectionFor OmniSmart Models Only-UPS/STANDBY Button For SmartPro Models Only-POWER ButtonButtons For All Models-MUTE/TEST Button Power LED Indicator LightsBattery Charge / Battery Power LED Other UPS Features Storage Service OMNISMART350HG SMART700HG SMART1200XLHG Enchufes y receptáculos grado hospital Sistemas UPS grado médicoSistemas UPS con Advertencias sobre la colocación del UPS Importantes instrucciones de seguridadAdvertencias sobre la conexión del equipo Advertencias sobre las bateríasSólo para modelos OmniSmart Sólo para modelos SmartProPara todos los modelos-Conecte su equipo en el UPS Sólo para modelos SmartPro Encienda el UPSComunicaciones en serie Instalación rápida optativaProtección para módem / fax Baterías externasSólo para modelos OmniSmart-Botón UPS/STANDBY UPS/Reserva Botones Sólo para modelos SmartPro- Botón Power AlimentaciónPara todos los modelos-Botón MUTE/TEST Silencio/Prueba Operación básica continuaciónLuces indicadoras Operación básica continuación Otras características del sistema UPS Almacenamiento Servicio Nota sobre el rotulado Système UPS avec fiche UL1778 et prises de classe hôpital Système UPS de classe médicaleImportantes consignes de sécurité Mises en garde relatives à lemplacement du système UPSMises en garde relatives au raccord du système UPS Mises en garde relatives au raccord de léquipementPour tous les modèles-Branchez votre équipement dans lUPS Pour les modèles SmartPro uniquementPour les modèles OmniSmart uniquement Communications en série Installation rapide facultativeProtection du modem télécopieur Batteries externesExploitation de base Pour tous les modèles-bouton MUTE/TEST MUET/TEST Exploitation de base suiteVoyants lumineux Exploitation de base suite Autres fonctions Entreposage Capacité de sortie VA/Watts Entretien200310034

OMNISMART350HG, BP36V27, AGOM350KSR57HG, SMART1200XLHG, SMART700HG specifications

Tripp Lite is a renowned manufacturer of power protection and connectivity solutions, and its lineup includes various high-quality products designed to meet the diverse needs of users. Among its offerings are the AGSM700PSR3HG, BP36V27, AGOM350KSR57HG, SMART1200XLHG, and OMNISMART350HG, each designed with unique features and technologies to ensure reliability and efficiency.

The AGSM700PSR3HG is a versatile sine wave uninterruptible power supply (UPS) designed for both home and office environments. With a robust 700VA/500W capacity, it provides battery backup and surge protection to critical devices. Its advanced microprocessor control technology guarantees accuracy and fast response to power disturbances. The UPS features multiple NEMA outlets, ensuring compatibility with various devices. Additionally, it includes USB connectivity for easy monitoring and management via Tripp Lite’s software.

The BP36V27 is an external battery pack that provides extended runtime for compatible Tripp Lite UPS systems. With a 36V battery configuration and high-quality battery technology, it increases the overall battery life of connected devices, ensuring operation during extended power outages. This feature is especially valuable for organizations that require uninterrupted operation of critical systems.

For high-demand environments, the AGOM350KSR57HG is an advanced line-interactive UPS. Featuring a 350VA/300W capacity, it combines automatic voltage regulation with surge protection to safeguard sensitive electronics from power fluctuations. Its compact design allows for easy installation in tight spaces, while a user-friendly LCD interface provides real-time status updates on power conditions and battery health.

The SMART1200XLHG is another robust UPS solution, offering 1200VA/1000W capacity and pure sine wave output. It is particularly suitable for networking equipment, PCs, and other electronics that require clean and consistent power. The unit features a high-efficiency design that optimizes energy usage and minimizes heat output, contributing to a greener environment.

Lastly, the OMNISMART350HG is an economical UPS that provides essential power backup and surge protection. With a capacity of 350VA/200W, it is designed for use with smaller devices, such as routers and modems. Its compact form factor makes it ideal for home offices or small businesses, and it also includes an easy-to-read LED display for monitoring power status.

In summary, Tripp Lite's AGSM700PSR3HG, BP36V27, AGOM350KSR57HG, SMART1200XLHG, and OMNISMART350HG offer outstanding features, technologies, and characteristics tailored to protect valuable equipment from power disturbances while providing peace of mind during outages. Whether for personal use or business applications, these products exemplify dependability in power management solutions.
Top Page Image Contents