Tripp Lite SMART700HG, AGSM1200PSR3HG Important Safety Instructions, UPS Location Warnings

Page 2

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

•Your UPS incorporates fusing only in the ungrounded phase conductor. UL2601-1 certified UPS systems (see Specifications) must not be used in countries other than the United States and Canada and must be used only in health care facilities on grounded systems where conditions of maintenance and supervision ensure that only qualified

persons will service the electrical distribution system.

•Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight and conductive contaminants.

•Your UPS is not suitable for use in the presence of a flammable anaesthetic mixture with air, oxygen or nitrous oxide.

•For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C).

•Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

•Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into itself; this will damage the UPS.

•Do not modify the UPS's plug, and do not use an adapter that would eliminate the UPS’s ground connection.

•Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used to connect your UPS to an outlet.

•If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems for life support devices in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

•Do not connect surge suppressors or extension cords to the output of your UPS. This may damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

•Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no user-serviceable parts inside.

•Because the batteries present a risk of electrical shock and burn from high short-circuit current, observe proper precautions. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles, and replace the existing batteries with the same number and type of new batteries (Sealed Lead-Acid). Do not open the batteries. Do not short or bridge the battery terminals with any object.

•Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

•The UPS batteries are recyclable. Refer to local codes for disposal requirements, or in the USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-8-228-8379) or visit www.rbrc.com for recycling information. Do not dispose of the batteries in a fire.

•If your UPS is equipped with an external battery connector, only connect Tripp Lite external battery packs of the appropriate voltage.

•If your UPS is not equipped with an external battery connector, do not attempt to add external

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Hospital-Grade Plugs Receptacles Medical Grade UPS SystemsUPS Systems with Important Safety Instructions UPS Location WarningsFor OmniSmart Models Only USB Communications Quick Installation optionalSerial Communications Tel/DSL ProtectionFor OmniSmart Models Only-UPS/STANDBY Button For SmartPro Models Only-POWER ButtonButtons For All Models-MUTE/TEST Button Indicator Lights Power LEDBattery Charge / Battery Power LED Other UPS Features Storage Service OMNISMART350HG SMART700HG SMART1200XLHG Enchufes y receptáculos grado hospital Sistemas UPS grado médicoSistemas UPS con Advertencias sobre la conexión del equipo Importantes instrucciones de seguridadAdvertencias sobre la colocación del UPS Advertencias sobre las bateríasPara todos los modelos-Conecte su equipo en el UPS Sólo para modelos SmartProSólo para modelos OmniSmart Sólo para modelos SmartPro Encienda el UPSProtección para módem / fax Instalación rápida optativaComunicaciones en serie Baterías externasBotones Sólo para modelos SmartPro- Botón Power Alimentación Sólo para modelos OmniSmart-Botón UPS/STANDBY UPS/ReservaOperación básica continuación Para todos los modelos-Botón MUTE/TEST Silencio/PruebaLuces indicadoras Operación básica continuación Otras características del sistema UPS Almacenamiento Servicio Nota sobre el rotulado Système UPS de classe médicale Système UPS avec fiche UL1778 et prises de classe hôpitalMises en garde relatives au raccord du système UPS Mises en garde relatives à lemplacement du système UPSImportantes consignes de sécurité Mises en garde relatives au raccord de léquipementPour tous les modèles-Branchez votre équipement dans lUPS Pour les modèles SmartPro uniquementPour les modèles OmniSmart uniquement Protection du modem télécopieur Installation rapide facultativeCommunications en série Batteries externesExploitation de base Exploitation de base suite Pour tous les modèles-bouton MUTE/TEST MUET/TESTVoyants lumineux Exploitation de base suite Autres fonctions Entreposage Entretien Capacité de sortie VA/Watts200310034

OMNISMART350HG, BP36V27, AGOM350KSR57HG, SMART1200XLHG, SMART700HG specifications

Tripp Lite is a renowned manufacturer of power protection and connectivity solutions, and its lineup includes various high-quality products designed to meet the diverse needs of users. Among its offerings are the AGSM700PSR3HG, BP36V27, AGOM350KSR57HG, SMART1200XLHG, and OMNISMART350HG, each designed with unique features and technologies to ensure reliability and efficiency.

The AGSM700PSR3HG is a versatile sine wave uninterruptible power supply (UPS) designed for both home and office environments. With a robust 700VA/500W capacity, it provides battery backup and surge protection to critical devices. Its advanced microprocessor control technology guarantees accuracy and fast response to power disturbances. The UPS features multiple NEMA outlets, ensuring compatibility with various devices. Additionally, it includes USB connectivity for easy monitoring and management via Tripp Lite’s software.

The BP36V27 is an external battery pack that provides extended runtime for compatible Tripp Lite UPS systems. With a 36V battery configuration and high-quality battery technology, it increases the overall battery life of connected devices, ensuring operation during extended power outages. This feature is especially valuable for organizations that require uninterrupted operation of critical systems.

For high-demand environments, the AGOM350KSR57HG is an advanced line-interactive UPS. Featuring a 350VA/300W capacity, it combines automatic voltage regulation with surge protection to safeguard sensitive electronics from power fluctuations. Its compact design allows for easy installation in tight spaces, while a user-friendly LCD interface provides real-time status updates on power conditions and battery health.

The SMART1200XLHG is another robust UPS solution, offering 1200VA/1000W capacity and pure sine wave output. It is particularly suitable for networking equipment, PCs, and other electronics that require clean and consistent power. The unit features a high-efficiency design that optimizes energy usage and minimizes heat output, contributing to a greener environment.

Lastly, the OMNISMART350HG is an economical UPS that provides essential power backup and surge protection. With a capacity of 350VA/200W, it is designed for use with smaller devices, such as routers and modems. Its compact form factor makes it ideal for home offices or small businesses, and it also includes an easy-to-read LED display for monitoring power status.

In summary, Tripp Lite's AGSM700PSR3HG, BP36V27, AGOM350KSR57HG, SMART1200XLHG, and OMNISMART350HG offer outstanding features, technologies, and characteristics tailored to protect valuable equipment from power disturbances while providing peace of mind during outages. Whether for personal use or business applications, these products exemplify dependability in power management solutions.
Top Page Image Contents