Tripp Lite SMART3000RMOD2U owner manual Storage, Service

Page 14
Storage

Storage

Before storing your UPS, turn it completely OFF. If you store your UPS for an extended period of time, recharge the UPS batteries for 4 to 6 hours once every three months. NOTE: After you connect the UPS to utility power, it will automatically begin charging its batteries. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. They will also discuss proper packaging and shipping procedures. Any damages (direct, indirect, special, incidental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.

14

Image 14
Contents SmartPro Rackmount Intelligent, Line-Interactive UPS SystemBattery Warnings IntroductionMaintenance Warnings UPS Location WarningsFeatures Front Control PanelRear Panel Features continuedNOTE For additional information, see “Optional Installation” section 2-Post Telecom Mounting MountingMounting 4-Post Rackmount Mounting continued Mounting Tower2 Plug your equipment into the UPS Quick Installation1 Plug the UPS into an outlet on a dedicated circuit 3 Turn the UPS OFF1 USB and Serial Communication Connection Optional Installation3 External Battery Connection 2 EPO Port Connection“ON” Button Basic OperationIndicator Lights Front Panel “OFF/STANDBY” Button100% Load/Battery Bar LED Basic Operation continuedLoad Level/Battery Capacity Indicator Lights Front Panel 80% Load/Battery Bar LED Other UPS Features Rear Panel Power Module Replacement Step 9 Not shown Press “On” button until unit beepsBattery Replacement Service StorageFCC Radio/TV Interference Notice WarrantyWarranty Registration Regulatory Compliance Identification Numbers1111 W. 35th Street, Chicago, IL 60609 USA