Mounting
WARNING!
Mount the Power Supply Module and Battery Module BEFORE connection.
The mounting brackets are only designed to support a Tripp Lite Power Supply Module and a single Battery Module. Do not mount or place any other devices on the mounting brackets. The mounting brackets will not support the additional weight and may fail.
Failure to follow these warnings may lead to product damage and/or risk of personal bodily harm.
The mounting bracket is only designed to fit specific mobile medical cart configurations (see diagrams). Tripp Lite offers additional mounting brackets for additional medical cart configurations. Contact Tripp Lite for details. The user must determine the fitness of the mounting hardware and procedures before mounting. If the hardware or procedures are not suitable for your application, contact Tripp Lite for assistance.
1Power Supply Module & Battery Module Mounting
1A Apply strips of
CAUTION!
The
This ensures the modules will remain securely in position, meeting the requirements of demanding medical environments. Due to the tape's strong bond, position the modules exactly where desired before pressing them into place.
1A |
1B Carefully lift Power Supply Module and Battery Module, center them over the tray and press down to bond the tape.
2
1
1B
2Remote User Interface (RUI) Mounting
Mount the Remote User Interface in a variety of positions on any flat surface using included
4