JVC GY-DV5000 manual Using an Anton-Bauer Battery Pack, Attaching the Battery Pack

4. POWER SUPPLY

Using an Anton-Bauer Battery Pack

To use an Anton-Bauer battery pack (Propack 13/14, Trimpack 13/14, Magnum 13/14, Compack 13/14 Series), it is necessary to detach the battery case from the GY-DV5000 and replace it with the Anton-Bauer battery holder. Use the following battery holder.

• Battery holder: Anton-Bauer QRQ27

Detaching the Battery Case From the GY-DV5000 and Attaching The Anton- Bauer Battery

2.

1.Black screw A

1.Remove the two black screws A on the battery case.

2.Remove the lower half of the battery case cover in the downward direction.

3.Connector

3.Mount screw B

3.Mount screw B

3. To remove the battery case, remove the four screws B fixing the battery case and the connector connecting the battery case to this unit.

Attaching the Anton-Bauer Battery Holder

4.

5.

5.

Anton-Bauer	Connector
Battery holder
	Compartment

4. Connect the connectors protruding from the GY-DV5000 with the connectors on the battery holder.

CAUTION:

Following connection of the connectors, insert them into the connector compartment.

Take care not to pinch the wires. This could result in damage.

5. Secure the battery holder to the GY-DV5000 with the four mount screws provided with the battery holder.

Attaching and Detaching an Anton-Bauer Battery Pack

Guide pins
Cassette cover side panel	Battery pack
Guide holes	(Trimpack)
(x3)
Release		Release lever
lever
		OPEN
	LCD BRIGHTDISPLAY
	AUDIO	PULL
	LEVEL
	FRONT	OPEN
	REAR
	CH-2 CH-1	CH-2
	AUDIO INPUT
	AUDIO SELECT
	CH-1	CH-2
	AUTO
	MANUAL
Side panel		Battery
with display

Attaching the Battery Pack

1. Align the 3 guide pins of the battery pack with the guide holes on the battery holder, and push straight to insert the battery pack.

The battery cannot be attached properly if the guide pins are not inserted straight.

2. Slide the battery pack toward the side panel where the cassette cover is located until it clicks. Now the battery pack has been attached.

Detaching the Battery Pack

■While pushing the release lever, slide the battery pack toward the side panel where the LCD display is located, then pull the battery pack outward to remove.

E-35