JVC GY-DV5000 manual Outputting CH-3, CH-4 Channel Audio, Setting, VTR indicator

8. PLAYBACK MODE

8-5 Outputting CH-3, CH-4 Channel Audio

The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-DV5000 records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input. (GY-DV5001 only)) When the GY-DV5000 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH- 4 channels, the AUDIO SELECT item on the AUDIO menu screen must be set.

.3	5600K
.4	5600K	1/64 ND
SHUTTER			STATUS
	MENU
AUTO IRIS			FULL AUTO

SHUTTER dial STATUS button

TOP MENU screen

––– MENU –––

AUDIO..

LCD/VF..

TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET	CANCEL
EXIT

AUDIO menu screen

––– AUDIO –––

TEST TONE	ON
AUDIO MODE	32K
A.OUT AT SEARCH	ON
CH1 FRONT VR	ENABLE
WIND CUT	BOTH
AUDIO REF.LEVEL	–20dB
AUDIO SELECT	CH3/4
AUDIO MONITOR	MIX
PAGE BACK

MEMO:

After-recording on the CH-3 and CH-4 channels is not possible.

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

25600K 1/8 ND

.3 5600K

.4 5600K 1/64 ND

SHUTTER	STATUS
						LCD	BRIGHT	DISPLAY
MENU
					AUDIO			PULL
					LEVEL	FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
				VTR		AUDIO SELECT
NORMAL		NORMAL				CH-1	CH-2
SPOT L		COMPRESS		CAM			AUTO
						MANUAL

POWER VTR

ON OFF

VTR indicator

Setting

■Confirm that the GY-DV5000 is in the VTR mode. (VTR indicator: On)

1. Press the STATUS button for 1 second or longer to display the TOP MENU screen.

2. Rotate the SHUTTER to align the cursor () with the AUDIO menu, and then press the SHUTTER dial.

●The AUDIO menu screen appears.

3.Rotate the SHUTTER to align the cursor () with the AUDIO SELECT item, and then press the SHUTTER dial.

●The setting area of the selected item starts blinking.

4.Rotate the SHUTTER dial to change the setting.

CH1/2 : To reproduce the sound (CH-1, CH-2) recorded during shooting.

MIX : To reproduce the sound recorded during shooting (CH-1, CH-2) and the after-recorded sound (on CH-3 and CH-4) simultaneously.

CH3/4 : To reproduce the sound after-recorded on CH- 3 and CH-4.

5.When the SHUTTER dial is pressed, the set value is confirmed.

6.To return to the normal screen, use either of the following methods.

●Press the STATUS button or

●Return to the TOP MENU screen and then select the EXIT item before pressing the SHUTTER dial.

E-61