JVC GY-DV5000 manual Monitoring Audio during Recording, Monitor Select switch

6. SETTING AND ADJUSTMENTS BEFORE SHOOTING

6-9 Monitoring Audio during Recording

MONITOR SELECT switch

				LCD	BRIGHT	DISPLAY
			MONITOR
			SELECT			COUNTER
			CH-1	FRONT
			MIX			TC
			CH-2	REAR		UB
CH-1	AUDIO	CH-2		CH-1	CH-2
	LEVEL			AUDIO INPUT
OPEN
		AUDIO INPUT		AUDIO SELECT		TC GENE.
EDITSEARCH		FRONT	REAR	CH-1	CH-2
MONITOR			LINE	AUTO		REGEN FREE
						REC
			MIC	MANUAL
FILTER			+48V			PRST

13200K

25600K 1/8 ND

.3 5600K

.4 5600K 1/64 ND

SHUTTER	STATUS
						LCD	BRIGHT	DISPLAY
MENU
					AUDIO			PULL
					LEVEL	FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
				VTR		AUDIO SELECT
NORMAL		NORMAL				CH-1	CH-2
SPOT L		COMPRESS		CAM			AUTO
						MANUAL

POWER VTR

ON OFF

PHONES jack

Monitoring volume Monitoring speaker control

The audio input during recording, in record-pause or stop mode can be monitored through the monitoring speaker or earphone.

●The monitoring audio is not output from the speaker while the PHONES jack is in use.

●Select the audio channel to be monitored using the MONITOR SELECT switch.

CH-1 : The sound input to the CH-1 channel is output.

MIX : The sound input to the CH-1 and CH-2 channels is output mixed.

CH-2 : The sound input to the CH-2 channel is output.

●The Monitoring volume control adjusts the monitoring volume.

●The loudspeaker or earphone outputs an alarm tone in the case of an abnormal condition occurring in the unit.

An alarm tone is also output when the tape end is reached or when the battery is running down. The volume of the alarm tone is set with the ALARM VR LEVEL item on the OTHERS (2/2) menu screen. (OFF/LOW/MIDDLE/HIGH)

*Do not increase the audio monitoring volume excessively; otherwise howling with the camera microphone may occur.

MEMO:

When connecting a stereotype earphone, make the following settings to output stereo sound.

●Set the MONITOR SELECT switch to MIX.

●Set the AUDIO MONITOR item on the AUDIO menu screen to STEREO.

●When AUDIO MONITOR in the AUDIO menu screen is set to “STEREO”, only the audio of CH-1 is output from the monitoring speaker.

E-51