JVC GY-DV5000 manual Status Screen in VTR Mode

2. CONTROLS, INDICATORS AND CONNECTORS

●Status 2

This screen displays the camera setup statuses.

Event display is not available while this screen is displayed.

Indication	Indication Contents
FULL AUTO	ON, OFF
GAIN	–3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB, LOLUX, ALC
SHUTTER	OFF, 1/6.25, 1/12.5, 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (STEP), V.SCAN 1/50.1 to
	1/2067.8 (VARIABLE), EEI (in ALC mode)
WHITE BAL	A, B, PRESET, FAW
IRIS LEVEL	BACK L, NORMAL, SPOT L
FILTER	3200K, 5600K+1/8ND, 5600K, 5600K+1/64ND
ZEBRA	70-80%, 85-95%, OVER95%, OVER100%
REMAIN	Remaining tape time (min) or tape type (Example: 95 min (	))
	(when using MiniDV cassette), (when using standard cassette),			(when using DVCAM cassette)
			DVCAM
	* DVCAM indicates IC Memory compatible DVCAM cassette.
	In the case of other DVCAM cassette than IC Memory compatible cassette,			or is indicated.
AUDIO	Audio sampling frequency and audio level adjustment method (Example) 32K (CH1 Å CH2 ˜ ) Å (Auto)
	˜ (Manual)

●Status 3

This screen only displays date and time, event display and alarm indications.

*Whether or not date and time should be displayed and the display style are set on the TIME/DATE MENU screen. ☞ page 43 “Displaying the Time and Date on the Screen”

■Status Screen in VTR MODE

8

7

	1
	00:00:00:00
			20min
	Event display area
			12.2V
		48k
PLAY	01/02/03 AM01:23:45

2

5

3

6 4

No.	Item	Contents
1	Indication of Time Code (TC)/User’s Bits (UB)	In the playback mode, the recorded time code (hour, minute, second, frame)
		is displayed. Whether or not to display this item is set with the TC/UB item
		on the LCD/VF (2/2) menu screen. Whether to show the time code or the
		user’s bits is selected with the COUNTER switch inside the side cover.
2	Remaining tape time	Remaining tape indication (displayed in 1-minute steps)
		This indicator blinks when remaining tape time is equivalent to less than 3
		minutes.
		Whether or not to display this item is set with the TAPE REMAIN item on
		the LCD/VF (2/2) menu screen.
		* When inserting a brand-new tape, the remaining tape time is not indicated.
		When the tape has been run, the indication will appear.
		* The remaining tape indication is to be used only as a guide.
		* When the unit is used at low temperatures, it may take a while before the
		indication of the remaining tape time appears.
3	Voltage indication	(Example) 12.2 V : Indicates battery voltage in 0.1 V steps.

E-23