JVC GY-DV5000 manual Header REC Menu Screen

11. MENU SCREENS

11-12 HEADER REC Menu Screen

The HEADER REC menu screen is used for settings related to the HEADER REC function. (☞ page 56)

Item		Function	Variation Range	Initial Setting
START KEY	Sets whether the HEADER REC operation should be executed when		STOP+VTR	DISABLE
	the VTR trigger button is pressed while the STOP button is pressed.		DISABLE
	STOP+VTR : HEADER REC operation is executed.
	DISABLE	: HEADER REC operation is not executed.
TC DATA	Sets the time code value for the point when the Record-Standby mode		EXECUTE	EXECUTE
	is engaged following completion of HEADER REC.		CANCEL
	EXECUTE : Confirms the set time code.
	CANCEL	: Clears the set time code.

*The time code value at the point when the Record-Standby mode is engaged may differ some frames from the value set for this item.

TC CLEAR	To reset the time code setting of the TC DATA item, set to EXECUTE		EXECUTE	CANCEL
	and then press the SHUTTER dial.		CANCEL
	EXECUTE : Resets.
	CANCEL : No reset.
UB DATA	Sets the user’s bits of the HEADER REC section.		EXECUTE	EXECUTE
	EXECUTE : Confirms the set user’s bits.		CANCEL
	CANCEL : Clears the set user’s bits.
		MEMO:
	● The user’s bits for the normal recording section are set on the TC/
		UB/CLOCK menu screen.
	● When the network pack KA-DV5000 is connected, and the HEADER
		REC section should be recorded on the CF card, make sure to set
		the user’s bits for the HEADER REC section and the normal
		recording section to the same value.
	● This item cannot be set when the UB REC item on the TC/UB/
		CLOCK menu screen is set to OFF. In this case, “- - - -” is displayed.
UB CLEAR	To reset the user’s bits setting of the UB DATA item, set to EXECUTE		EXECUTE	CANCEL
	and then press the SHUTTER dial.		CANCEL
	EXECUTE : Resets.
	CANCEL : No reset.
BARS TIME	Sets the duration (seconds) in which the color bar signal and test tone		0 SEC	30 SEC
	(1 kHz) is recorded during HEADER REC. (1-sec steps)		~
			99 SEC
BLACK TIME	Sets the duration (seconds) in which the black signal is recorded during		0 SEC	30 SEC
	HEADER REC. (1-sec steps)		~
			99 SEC
PAGE BACK	The TC/UB/CLOCK menu screen returns when the SHUTTER dial is		–––––	–––––
	pressed.

E-78