Tripp Lite Extended-Run Single-Phase Battery Cabinet Battery Cabinet Installation, Preparation

Page 5

3. Battery Cabinet Installation

Read Section 2 – Important Safety Instructions Before Installation

3.1Preparation

•At your site, prepare to off-load the battery cabinet from the delivery truck and transport it to the final installation location.

Consider both the packaged weight and dimensions.

•Assure that the floor can bear the load of the specific battery cabinet being installed. The battery cabinet must be installed in a structurally sound area with a level floor that is able to bear the weight of the battery cabinet and other equipment that will be installed nearby.

•Draw a wiring schematic representing the cables connected between the battery cabinet’s output terminal blocks and any external disconnect device, junction box and/or load/rectifier.

•If you plan to store the battery cabinet for an extended period before or after installation, follow the instructions in Section 8 – Storage and Service.

3.2Transportation

1.Inspect the shipping container(s) for visible damage. (Do not remove the stretch wrap around the unit until it has been transported to the final installation location.) Confirm that the model name and rating match the unit you ordered. If you determine that the unit has been damaged during shipping, or if anything appears to be missing, contact Tripp Lite for assistance. Do not attempt to use the unit if it has been damaged or mishandled.

2.Do not attempt to move or unpack the battery cabinet without assistance. Use appropriate handling equipment rated to bear the weight and bulk of the battery cabinet, such as freight elevators, pallet jacks and forklifts. (Fully extend forks under load.

Spread forks to maximum possible width under load. Lift cabinet from bottom only. Wear safety shoes.) Confirm that load limits for freight elevators, handling equipment and floors along the transport route will not be exceeded by the combined weight of the packaged battery cabinet, handling equipment and personnel. Confirm that the packaged unit will pass through any doorways along the intended route.

3.The battery cabinet is secured with stretch wrap to protect it during shipping and movement within a facility. Remove the stretch wrap from the battery cabinet when the unit is in the final installation location—not before.

3.3Mechanical Check

While the assembled cabinet battery system is still on the shipping pallet, inspect all sides for impact or other damage.

1.Remove front access panels and set them aside, being careful not to scratch the finish.

2.Confirm that all individual batteries are secure in the battery cabinet and that no batteries have been damaged.

3.Confirm that none of the internal parts (terminal blocks, fuse blocks, fuses, circuit breakers and other parts) have been damaged.

4.If the battery cabinet includes an integrated battery charger (“C” models only), examine the wires at the DC output terminal closely. If any of the leads are bent or otherwise damaged from shipping, contact Tripp Lite. Damaged leads could cause a battery short circuit.

5.Note the individual battery model number and refer to Section 7-2for the battery’s terminal type and recommended torque.

6.Use insulated tools to tighten all the battery terminal connections to the recommended torque.

7.Use insulated tools to tighten the cables from the positive and negative output terminals at the end batteries to the output terminal block, fuse block or circuit breaker.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Extended-Run Single-Phase Battery Cabinet Introduction FeaturesInstallation and Location Warnings Important Safety InstructionsBattery Warnings Preparation Battery Cabinet InstallationTransportation Mechanical CheckPreliminary Electrical Check Internal Wiring TypicalBattery Cabinet Placement Final Electrical Check Battery Charger Electrical Connection Select ModelsElectrical Connection 10a Daisy-Chaining Multiple Battery CabinetsDetermine Charging Voltages Operation and ChargingInitial Charge Operational CheckMaintenance Schedule Quarterly Check MaintenanceFuse Replacement Semiannual CheckBattery Cabinet Diagram 3 Shelves DiagramsBattery and Breaker Diagrams DiagramsIntegrated Battery Charger Select Models Recommended Torque SpecificationsDimensions and Floor Loading Warranty Storage and ServiceService StorageTh Street, Chicago, IL 60609 USA

Extended-Run Single-Phase Battery Cabinet specifications

The Tripp Lite Extended-Run Single-Phase Battery Cabinet serves as an essential backup power solution, designed for environments where prolonged uptime is critical. This compact and efficient battery cabinet is tailored primarily for use with Tripp Lite's SmartPro line of UPS systems, delivering reliable power protection and extended runtime capabilities for critical equipment.

One of the main features of the Tripp Lite Extended-Run Battery Cabinet is its impressive scalability. This unit is designed to expand the runtime of UPS systems significantly, enabling users to keep their systems operational during extended power outages. With the ability to house additional batteries, it allows organizations to customize their backup power based on specific needs. The cabinet can accommodate multiple battery packs, providing flexibility and ease of use.

In terms of design, the battery cabinet is engineered for optimal performance. Its robust construction ensures durability and the ability to withstand the rigors of various industrial settings. The cabinet also features a compact footprint, enabling seamless integration into server rooms, data centers, and other critical environments without consuming excessive space.

Advanced technologies are evident in the cabinet's smart charging capabilities. The integrated management features enable precise monitoring and control, ensuring that batteries are efficiently charged and maintained. The intelligent battery management system maximizes battery life while minimizing maintenance requirements, making it suitable for organizations that rely on continuous operation.

Moreover, the Tripp Lite Extended-Run Battery Cabinet is equipped with a user-friendly interface, allowing for straightforward installation and configuration. Visual indicators provide clear status updates, ensuring users can monitor battery health and performance with ease. The seamless communication with the UPS systems further enhances the overall user experience, providing real-time updates and alerts.

In conclusion, the Tripp Lite Extended-Run Single-Phase Battery Cabinet represents a dependable and scalable power solution for businesses that demand lasting performance. Its combination of advanced technology, rugged design, and user-friendly features makes it an ideal choice for safeguarding critical equipment against power interruptions. This battery cabinet not only enhances the reliability of UPS systems but also provides peace of mind knowing that essential operations can continue uninterrupted during extended outages.
Top Page Image Contents