Storage & Service, Specifications | Tripp Lite 450-1500VA instruction

External Battery Connector (Select Models Only)

Use to connect additional Tripp Lite battery packs for additional runtime. Refer to the label next to the connector for the appro- priate Tripp Lite battery pack to connect. Refer to instructions available with the battery pack for complete connection informa- tion and safety warnings.

Battery Replacement Door

Under normal conditions, the original battery in your UPS will last several years. Battery replacement should be performed only by qualified service personnel. Refer to “Battery Warnings” in the Safety section on page 2.

Storage & Service

Storage

Turn your UPS OFF: first engage the ON/Standby Switch and release it to place your UPS in the “Standby” mode, then disconnect the UPS power cord from the wall outlet. If you plan on storing your UPS for an extended period of time, recharge the UPS batteries once every three months. Follow steps #1 and #3 in the Quick Installation section and allow the UPS to charge from 4 to 6 hours. If you leave your UPS batteries discharged for an extended period of time, they will suffer permanent loss of capacity.

Service

If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the 2 year warranty period, enclose a copy of your sales receipt.

Specifications

	Smart INT 450	Smart INT 700	Smart INT 1000
Output Capacity (VA/Watts):	450/280	700/425	1000/680
Battery Runtime (Half Load/
Full Load) Minutes:	19/5	20/6	23/8
Battery Recharge Time:	2-4 hrs.	2-4 hrs.	2-4 hrs.
Approvals:	UL, CE	UL, CE	UL, CE
	Smart INT 1500
Output Capacity (VA/Watts):	1500/940
Battery Runtime (Half Load/
Full Load) Minutes:	25/10
Battery Recharge Time:	2-4 hrs.
Approvals:	UL, CE

Input Voltage (230V); Input Frequency (50/60 Hz, Auto-Selecting); On-Line Input Voltage Range (151-274 volts); Voltage-Regulated Output Voltage Range (230V +6%/-15%); On-Battery Output Voltage Range (230V ± 5%); Output Waveform Line Mode (filtered sinewave); Output Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC TVSS Protection Modes (H to N, H to G, N to G).

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change.

200311039 93-xxxx SmartINT1500 Owner's Manual6_English.p65

11/25/2003, 11:56 AM

450-1500VA specifications

The Tripp Lite 450-1500VA is a versatile and reliable uninterruptible power supply (UPS) designed to safeguard critical electronic equipment from power disturbances. This model is particularly suited for home offices, small businesses, and network gear, ensuring that your devices receive continuous power even during outages or fluctuations.

One of the standout features of the Tripp Lite 450-1500VA is its ability to deliver reliable battery backup, with a capacity that provides ample power to keep your equipment running smoothly. The model boasts numerous outlets, allowing users to connect multiple devices simultaneously. Each outlet is typically equipped with surge protection, shielding your electronic equipment from voltage spikes that could cause damage.

A critical technology integrated within this UPS is the Advanced Voltage Regulation (AVR) feature. This technology ensures that devices receive a consistent voltage level without switching to battery power unnecessarily. AVR helps extend battery life and offers seamless operation, minimizing interruptions in power supply, which is essential for sensitive electronic devices like computers, servers, and networking equipment.

The Tripp Lite 450-1500VA is designed with a user-friendly interface, featuring an LCD display that provides real-time information on battery status, load level, and other important metrics. This display allows users to monitor the performance of the UPS at a glance, making it easier to diagnose potential issues before they become critical.

In terms of characteristics, the UPS is compact yet rugged, designed for easy installation and maintenance. It typically incorporates a hot-swappable battery design, meaning that the battery can be replaced without needing to power down connected equipment. This feature is crucial for maintaining uptime in business environments.

Another important aspect of the Tripp Lite 450-1500VA is its built-in diagnostic capabilities. The UPS conducts regular self-tests to ensure that the battery and other components are functioning properly. This proactive approach help users identify potential issues early, leading to better overall performance and reliability.

Overall, the Tripp Lite 450-1500VA is a dependable solution that combines cutting-edge technologies with practical features, making it a valuable addition to any environment that requires a stable power supply.