Basic Operation, Switches | Tripp Lite 450-1500VA guide

Basic Operation

Switches

System Enable Switch

This switch activates the battery charger and intelligent micro- processor. Always leave it in the “ON” (or “ENABLE/I”) position when your UPS is plugged in. Set the System Enable Switch to “OFF” (or “DISABLE/O”) only if you store or ship your UPS (to reduce battery drain).

Note: the “ ” light will flash until you engage the ON/Standby Switch to activate the “ON” mode (power ON at the UPS receptacles).

ON/Standby Switch

This momentary switch controls power to the UPS receptacles. Engage it momentarily and release it to toggle between the “ON” mode (power ON at the UPS receptacles) and “Standby” mode (power OFF at the UPS receptacles).

Mute/Test Switch

Use this momentary switch to do two things: Silence the UPS On Battery alarm

Engage this switch and release it to silence the UPS on Battery alarm, a series of short beeps that sounds intermittantly when the UPS is providing AC power from battery. Note: when the battery is nearly depleted, the Low Battery alarm, a continuous beep that cannot be silenced, will alert you to immediately shut down connected equipment.

Test your UPS’s battery charge

Leave your connected equipment ON. With your UPS plugged in and completely turned ON, engage this switch; hold it there for 5 seconds and release it. You will hear a series of short beeps as the UPS momentarily switches to battery to test its charge. The “” light will turn ON and the alarm (a long, continuous beep) will sound if your UPS fails a self-test and/or the UPS battery is less than fully charged. If this occurs, let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service. CAUTION: Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.

Indicator Lights

Light descriptions apply when the UPS is plugged into a wall outlet and turned ON.

This green light will shine constantly to indicate AC power is available at the receptacles. It will flash to indicate AC power is not available. (See “System Enable Switch” and “On/Standby Switch” descriptions above.)

This multi-colored light displays 7 separate UPS battery charge conditions. It will turn from red (low) to yellow (medium) to green (full) to show you the level of battery charge. If the light is constant, your UPS is operating from line power, and the battery is charging. If the light is flashing, your UPS is operating from battery power, and the battery is discharging. When the light flashes red,

4close any files you are working on and shut down your computer.

200311039 93-xxxx SmartINT1500 Owner's Manual4_English.p65

11/25/2003, 11:56 AM

450-1500VA specifications

The Tripp Lite 450-1500VA is a versatile and reliable uninterruptible power supply (UPS) designed to safeguard critical electronic equipment from power disturbances. This model is particularly suited for home offices, small businesses, and network gear, ensuring that your devices receive continuous power even during outages or fluctuations.

One of the standout features of the Tripp Lite 450-1500VA is its ability to deliver reliable battery backup, with a capacity that provides ample power to keep your equipment running smoothly. The model boasts numerous outlets, allowing users to connect multiple devices simultaneously. Each outlet is typically equipped with surge protection, shielding your electronic equipment from voltage spikes that could cause damage.

A critical technology integrated within this UPS is the Advanced Voltage Regulation (AVR) feature. This technology ensures that devices receive a consistent voltage level without switching to battery power unnecessarily. AVR helps extend battery life and offers seamless operation, minimizing interruptions in power supply, which is essential for sensitive electronic devices like computers, servers, and networking equipment.

The Tripp Lite 450-1500VA is designed with a user-friendly interface, featuring an LCD display that provides real-time information on battery status, load level, and other important metrics. This display allows users to monitor the performance of the UPS at a glance, making it easier to diagnose potential issues before they become critical.

In terms of characteristics, the UPS is compact yet rugged, designed for easy installation and maintenance. It typically incorporates a hot-swappable battery design, meaning that the battery can be replaced without needing to power down connected equipment. This feature is crucial for maintaining uptime in business environments.

Another important aspect of the Tripp Lite 450-1500VA is its built-in diagnostic capabilities. The UPS conducts regular self-tests to ensure that the battery and other components are functioning properly. This proactive approach help users identify potential issues early, leading to better overall performance and reliability.

Overall, the Tripp Lite 450-1500VA is a dependable solution that combines cutting-edge technologies with practical features, making it a valuable addition to any environment that requires a stable power supply.