Tripp Lite PDUMH20ATNET, PDUMH15ATNET Automatic Transfer Switch, Preferred Configuration

Page 10

Configuration and Operation

Automatic Transfer Switch

When the Primary and Secondary inputs are both connected to Tripp Lite UPS Systems, the PDU operates as an Automatic Transfer Switch, providing redundant input power for high availability applications. Under normal operating conditions, the PDU will distribute power from the Primary input source, switching to the Secondary input source under certain conditions. The PDU will switch to the Primary source whenever it is Good according to the PDU input voltage definitions (see below).

Automatic Transfer Switch Source Selection

Upon power-up, the PDU looks for a source >85V. If it is unable to find a source >85V, it remains off.

Input voltage definitions:

99V

< Vin < 139V

Good

75V

< Vin < 99V

Fair

Vin < 75V

Bad

In normal operation (after power-up), if the selected source is no longer Good, the PDU will attempt to switch to the other source, but only if the other source is Good. If the selected source becomes Fair and the other source is not Good, the PDU will keep the loads connected to the selected source until the selected source becomes Bad, at which point the loads will be disconnected (note that the source selection doesn't change). After the loads are disconnected, they remain disconnected until the selected source becomes >85V, or until the other source becomes Good.

Preferred Configuration

The Automatic Transfer Switch function provides increased availability when the Primary and Secondary inputs of the PDU are connected to separate Tripp Lite UPS Systems that are connected to separate utility power sources. For maximum availability, Tripp Lite recommends using matching SmartOnline UPS Systems with pure sine wave output for the Primary and Secondary input power sources. The automatic transfer switch function will be compromised if the primary and secondary inputs are connected to the same utility power source.

Utility B

Utility A

Facility Circuit

Facility Circuit

Secondary UPS

Primary UPS

Secondary Input Cord

Primary Input Cord

Critical Equipment

PDUMH15ATNET

Loads

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents PDUMH15ATNET PDUMH20ATNET Th Street Chicago, IL 60609 USAImportant Safety Instructions Mounting the PDU Connecting the PDU20U Rack Mounting Remove the screws Secondary input is required for the PDUs Dynamic IP Address Assignment Networking the PDUStatic IP Address Assignment Network Interface Parameters Networking the PDU Testing Network Connection Features Network Operating Conditions Automatic Transfer Switch Preferred ConfigurationRemote Monitoring and Control Quick TestLimited Warranty Mail techsupport@tripplite.comManual del propietario Instrucciones de seguridad importantes Guarde Estas InstruccionesMontaje de la PDU Conexión de la PDUFuncionará sin conectar el cordón de Instalación continuaciónConexión de la PDU continuación InformaciónAsignación de una Dirección IP Estática Conectando Su PDU a la RedAsignación de una Dirección IP Dinámica Especificar la emulación VT100 CConectando Su PDU a la Red continuación Instalación continuación Características Características continuación Condiciones de Operación de la RedInterruptor de transferencia automática Prueba rápida Configuración y operación continuaciónControl y monitoreo remoto Correo Electrónico techsupport@tripplite.comGarantía Limitada Manuel du propriétaire Importantes consignes de sécurité Conserver CES DirectivesMontage de lunité de distribution dalimentation PDU Connexion de lunité de distribution dalimentation PDUConnexion de lunité de distribution dalimentation PDU suite Installation suitePDU fonctionne sans le cordon dalimentation Affectation dune adresse IP statique Mise en réseau de lunité de distributionAffectation dune adresse IP dynamique Spécifier lémulation VT100 CMise en réseau de lunité de distribution suite Installation suite Caractéristiques Caractéristiques suite Conditions de fonctionnement du réseauCommutateur de transfert automatique Circuit B Circuit a Onduleur secondaire Onduleur primaireAssistance à la clientèle 773 Configuration et fonctionnement suiteSurveillance et commande à distance Courriel techsupport@tripplite.comGarantie Limitée

PDUMH15ATNET, PDUMH20ATNET specifications

Tripp Lite is renowned for providing robust power management solutions, and their PDUMH15ATNET and PDUMH20ATNET models are no exceptions. These intelligent power distribution units (PDUs) are specifically designed for data centers and high-density server environments, delivering advanced features that ensure reliable power distribution and management.

Both models are equipped with 15 and 20 outlets respectively, allowing for the connection of multiple devices. The outlets are NEMA 5-15R for the PDUMH15ATNET and NEMA 5-20R for the PDUMH20ATNET, providing versatility to accommodate various plug types. They also come with a 15-amp and 20-amp power input, respectively, equipped with a heavy-duty power cord that guarantees stable connectivity and reduces the risk of accidental disconnection.

One of the standout features of the PDUMH series is their integrated network management capabilities. With an embedded Ethernet port, the PDUMH15ATNET and PDUMH20ATNET offer remote management via a secure web interface, allowing users to monitor and control power distribution from virtually anywhere. This includes the ability to measure and report on energy usage, thereby providing insights for optimizing power consumption and enhancing energy efficiency.

These PDUs utilize advanced surge protection technology, helping to safeguard connected equipment from power surges and spikes. Additionally, they feature customizable outlet sequencing, which enables administrators to stagger the startup of connected devices, minimizing inrush current and preventing circuit overloads.

Further enhancing their utility, both models incorporate environmental monitoring through optional sensors that can detect changes in temperature and humidity. This capability is critical for preventing overheating and ensuring a stable operating environment for sensitive equipment.

Moreover, the PDUMH series supports various mounting options, including vertical and horizontal configurations, catering to different rack setups and preferences. Their sturdy construction and easy-to-read LED indicators ensure long-lasting performance and straightforward operation, even in demanding environments.

Overall, Tripp Lite's PDUMH15ATNET and PDUMH20ATNET represent a significant advancement in power management technology, combining reliability, versatility, and intelligence to meet the evolving needs of modern data centers and server rooms. Whether for mission-critical applications or general IT tasks, these PDUs provide the foundation for effective power management.
Top Page Image Contents