Tripp Lite B126-2X2, B126-4X4 owner manual RS232 Serial Control

RS232 Serial Control

Before using RS232 Serial Control, you must first go into you Terminal Emulation Software and update the COM port settings.

1Go to the Setup drop-down menu and select the Serial Port option.

2Select the COM port that is being used, and update the remaining settings as follows: Baud Rate (57600), Data (8 bit), Parity (none), Stop (1 bit), Flow Control (none).

10

13-11-140 93-32BB.indd 10 11/19/2013 4:57:42 PM