Tripp Lite B006-VUA4-K-R owner manual Click Next

Page 23

Firmware Upgrade Utility continued

7.Highlight the KVM switch in the Device List by clicking on it with the mouse. If you want the Firmware Upgrade Utility to check the KVM’s firmware version to see if it is older/newer than the firmware upgrade file, check the Check Firmware Version box in the lower-left of the screen. If you want the Firmware Upgrade Utility to upload the firmware upgrade file without checking the KVM’s firmware version, leave this box unchecked.

Click Next.

8.If the Check Firmware Version box is checked, and the Firmware Upgrade Utility finds the KVM’s firmware is newer than that of the firmware upgrade file, you will be prompted to continue or cancel. Once the firmware upgrade starts, status messages appear in the Status Message panel and progress towards completion is shown in the Progress Bar. When the upgrade is complete, the Status Message panel will inform you that the firmware upgrade was ok. At this point, click Finish to complete the firmware upgrade. After a successful firmware upgrade, the switch will reset itself.

23

201004198 93-2947.indd 23

4/23/2010 3:26:54 PM

Image 23

Contents FCC Information RoHSConsole Requirements Table of ContentsPackage Contents Version FeaturesComputer Requirements Supported Operating SystemsFront Panel Orange when the KVM focus is on the corresponding portBack Panel Safety Instructions Hardware SetupSystem Installation Rackmount InstallationBasic Operation Powering Off and RestartingPerforms a USB keyboard Port SwitchingManual Push-Buttons Hotkeys Mouse Port Switching FunctionalityHotkey Setting Mode Alternate Hotkey Setting Mode Activation CommandSwitching USB Focus Only to the Next Port Switching KVM Focus Only to a Desired PortSwitching KVM Focus Only to the Next Port Switching USB Focus Only to a Desired PortSwitching Audio Focus Only to the Next Port Switching Audio Focus Only to a Desired PortInitiate an Auto Scan at a Desired Time Interval Skip ModeInitiate an Auto Scan Video Sync List KVM SettingsUSB Keyboard/Mouse Reset Alternate OSD Menu Activation CommandTo Ctrl, Ctrl Hotkey Command Summary TableAction Hotkey Command Command to Ctrl, F12Component OSD OperationOSD Main Screen OSD Main Screen Components TableOSD Main Page Functionality Switch KVM, USB and Audio Focus Simultaneously via KeyboardSwitch KVM, USB and Audio Focus Simultaneously via Mouse Individually Switch KVM, USB and Audio Focus via KeyboardF4 Scan Individually Switch KVM, USB and Audio Focus via MouseNaming Ports Exiting the OSD Main ScreenIs Scroll Lock, Scroll Lock OSD Settings Page FunctionalitySetting Description F8 LogoutValues Scan DurationMouse Emulation Complete instructions on how to perform a firmware upgradeSettings Page. See page 21 for details Firmware Upgrade UtilityClick Next PC Keyboard Mac Keyboard AppendixMac Keyboard Emulation Sun Keyboard EmulationEnglish Factory Default SettingsSetting Default OffFeature Specification SpecificationsRegulatory Compliance Identification Numbers Warranty & Warranty Registration201004198 932947-EN