Tripp Lite B006-VUA4-K-R owner manual Basic Operation, Powering Off and Restarting

Page 8

System Installation continued

3Connect your microphone and speakers to the corresponding console 3.5 mm jacks on the front panel or the back panel. The jacks on the front panel of the unit will take priority over those on the back panel.

4Connect the console end of the KVM Cable Kit to any available computer ports on the back panel of the unit. The connectors and ports on both the KVM Cable Kits and the KVM switch are color-coded/marked for easy installation. Note: As each set of computer ports are not perfectly aligned, make sure that the connectors on the KVM Cable Kit are connected to the same set of computer ports.

5Connect the computer end of the KVM Cable Kit to the corresponding ports on the computer you wish to connect. Note: The B006-VUA4-K-R comes with four 4-ft. USB KVM Cable Kits. If you need a longer cable, you will have to purchase a separate P756- Series USB KVM Cable Kit of the appropriate length. If you wish to connect to a PS/2 computer, you will need to purchase a P757-Series PS/2 KVM Cable Kit. Computers connected using a P757-Series PS/2 KVM Cable Kit will not be able to use the built-in USB 2.0 hub functionality.

6Repeat steps 4 and 5 for each computer you are connecting.

7Connect the included power supply to the KVM switch, and then plug it into an appropriate power source. To help protect your system from sudden transient increases and decreases in electrical power, it is recommended that you plug your devices into a

Tripp Lite Surge Suppressor, Line Conditioner, or Uninterruptible Power Supply (UPS).

8Connect up to two USB 2.0 peripherals to the USB 2.0 peripheral ports on the front and back of the unit.

9Turn on the power to all connected devices.

10When the login screen appears, enter in the default Username (Administrator) and

Password (Password). For security purposes, it is strongly recommended that you change these to something unique. (See page 21 for details on changing the Password.)

Basic Operation

Powering Off and Restarting

In the event that you need to power off the KVM switch, you must follow the steps below:

1.Shut down all computers connected to the KVM switch.

2.Unplug the power supply from the KVM switch.

3.Wait 10 seconds and then plug the power supply back into the KVM switch.

4.Power on all of the connected computers.

8

201004198 93-2947.indd 8

4/23/2010 3:26:53 PM

Page 7 Page 9
Image 8
Page 7 Page 9
Contents RoHS FCC InformationConsole Requirements Table of ContentsPackage Contents Features Computer RequirementsSupported Operating Systems VersionOrange when the KVM focus is on the corresponding port Front PanelBack Panel Hardware Setup Safety InstructionsRackmount Installation System InstallationPowering Off and Restarting Basic OperationPerforms a USB keyboard Port SwitchingManual Push-Buttons Mouse Port Switching Functionality Hotkey Setting ModeAlternate Hotkey Setting Mode Activation Command HotkeysSwitching KVM Focus Only to a Desired Port Switching KVM Focus Only to the Next PortSwitching USB Focus Only to a Desired Port Switching USB Focus Only to the Next PortSwitching Audio Focus Only to a Desired Port Switching Audio Focus Only to the Next PortInitiate an Auto Scan at a Desired Time Interval Skip ModeInitiate an Auto Scan List KVM Settings USB Keyboard/Mouse ResetAlternate OSD Menu Activation Command Video SyncHotkey Command Summary Table Action Hotkey CommandCommand to Ctrl, F12 To Ctrl, CtrlOSD Operation OSD Main ScreenOSD Main Screen Components Table ComponentSwitch KVM, USB and Audio Focus Simultaneously via Keyboard Switch KVM, USB and Audio Focus Simultaneously via MouseIndividually Switch KVM, USB and Audio Focus via Keyboard OSD Main Page FunctionalityIndividually Switch KVM, USB and Audio Focus via Mouse Naming PortsExiting the OSD Main Screen F4 ScanOSD Settings Page Functionality Setting DescriptionF8 Logout Is Scroll Lock, Scroll LockScan Duration ValuesComplete instructions on how to perform a firmware upgrade Mouse EmulationFirmware Upgrade Utility Settings Page. See page 21 for detailsClick Next Appendix Mac Keyboard EmulationSun Keyboard Emulation PC Keyboard Mac KeyboardFactory Default Settings Setting DefaultOff EnglishSpecifications Feature SpecificationWarranty & Warranty Registration Regulatory Compliance Identification Numbers201004198 932947-EN
Top Page Image Contents