Tripp Lite B006-VUA4-K-R owner manual Back Panel

Page 5

Features continued

Front Panel continued

3Console Audio Connectors: A separate set of console speaker and microphone jacks are located on the front panel of the unit for greater accessibility. Devices plugged into these ports will take priority over devices plugged into the console speaker and microphone jacks on the back panel of the unit.

4USB 2.0 Peripheral Port: USB 2.0 devices (printers, scanners, etc.) can be plugged into this port and shared between the connected computers.

Back Panel

12

3

4

5

1Firmware Upgrade Port: When performing a firmware upgrade, the included firmware upgrade cable connects to the KVM switch here.

2USB 2.0 Peripheral Port: USB 2.0 devices (printers, scanners, etc.) can be plugged into this port and shared between the connected computers.

3Power Jack: The included power supply connects to the KVM switch here.

4Console Ports: Your monitor, keyboard, mouse, microphone and speakers plug into these ports.

5Computer Ports: The P756-Series (USB) and P757-Series (PS/2) KVM Cable Kits

connect to the KVM switch here. Note: These 17-pin connectors are shaped specifically to work with P756-Series and P757-Series KVM Cable Kits. Do not attempt to use ordinary VGA cable to connect a computer to the KVM switch.

5

201004198 93-2947.indd 5

4/23/2010 3:26:52 PM

Image 5

Contents FCC Information RoHSConsole Requirements Table of ContentsPackage Contents Computer Requirements FeaturesSupported Operating Systems VersionFront Panel Orange when the KVM focus is on the corresponding portBack Panel Safety Instructions Hardware SetupSystem Installation Rackmount InstallationBasic Operation Powering Off and RestartingPerforms a USB keyboard Port SwitchingManual Push-Buttons Hotkey Setting Mode Mouse Port Switching FunctionalityAlternate Hotkey Setting Mode Activation Command HotkeysSwitching KVM Focus Only to the Next Port Switching KVM Focus Only to a Desired PortSwitching USB Focus Only to a Desired Port Switching USB Focus Only to the Next PortSwitching Audio Focus Only to the Next Port Switching Audio Focus Only to a Desired PortInitiate an Auto Scan at a Desired Time Interval Skip ModeInitiate an Auto Scan USB Keyboard/Mouse Reset List KVM SettingsAlternate OSD Menu Activation Command Video SyncAction Hotkey Command Hotkey Command Summary TableCommand to Ctrl, F12 To Ctrl, CtrlOSD Main Screen OSD OperationOSD Main Screen Components Table ComponentSwitch KVM, USB and Audio Focus Simultaneously via Mouse Switch KVM, USB and Audio Focus Simultaneously via KeyboardIndividually Switch KVM, USB and Audio Focus via Keyboard OSD Main Page FunctionalityNaming Ports Individually Switch KVM, USB and Audio Focus via MouseExiting the OSD Main Screen F4 ScanSetting Description OSD Settings Page FunctionalityF8 Logout Is Scroll Lock, Scroll LockValues Scan DurationMouse Emulation Complete instructions on how to perform a firmware upgradeSettings Page. See page 21 for details Firmware Upgrade UtilityClick Next Mac Keyboard Emulation AppendixSun Keyboard Emulation PC Keyboard Mac KeyboardSetting Default Factory Default SettingsOff EnglishFeature Specification SpecificationsRegulatory Compliance Identification Numbers Warranty & Warranty Registration201004198 932947-EN