Tripp Lite B020-016-17-IP owner manual Configuration, Setting Function, Number + Port Name

Page 15

7.Administration (continued)

7.4Configuration Page

The OSD Configuration page allows users to set up their own, individual, working environments. The NetDirector Console KVM Switch with IP Access stores a separate configuration record for each user profile, and sets up the working configuration according to the Username that is used to log in.

The Configuration page settings are explained in the following table:

Setting

Function

 

 

 

Selects which Hotkey controls the OSD function:

 

[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. Since

OSD Hotkey

the Ctrl key combination may conflict with programs

 

running on the computers, the default is the Scroll Lock

 

combination.

 

 

 

Selects how the Port ID is displayed: the Port Number

 

alone (PORT NUMBER); the Port Name alone (PORT

ID Display

NAME); or the Port Number plus the Port Name (PORT

 

NUMBER + PORT NAME). The default is PORT

 

NUMBER + PORT NAME.

 

 

 

Determines how long a Port ID displays on the monitor

ID Duration

after a port change has taken place. You can choose an

amount from 0 - 255 seconds. The default is 5 Seconds.

 

 

0 is Always On.

 

 

Setting

Function

 

 

 

Selects which computers will be accessed under Auto

 

Scan Mode (To start Auto Scan Mode, see section

 

9.4.2, Toolbar Icons) Choices are: ALL - All the Ports

 

which have been set Accessible; POWERED ON - Only

 

those Ports which have been set Accessible and are

Scan Select

Powered On; QUICK VIEW - Only those Ports which

 

have been set Accessible and have been selected

 

as Quick View Ports; QUICK VIEW + POWERED ON

 

- Only those Ports which have been set Accessible

 

and have been selected as Quick View Ports and are

 

Powered On. The default is ALL.

 

 

 

Determines how long the focus dwells on each port as

Scan Duration

it cycles through the selected ports in Auto Scan Mode.

Key in a value from 0 - 255 seconds. The default is 10

 

 

seconds; a setting of 0 disables the Scan function.

 

 

 

If there is no input from the console for the amount of

Screen Blanker

time set with this function, the screen is blanked. Key in

a value from 1 - 30 minutes. A setting of 0 disables this

 

 

function. The default is 0 (disabled).

 

 

 

If there is no Operator input for the amount of time set

 

with this function, the Operator is automatically logged

Logout Timeout

out. A login is necessary before the KVM switch can be

 

accessed again. Enter a value from 0 - 180 minutes.

 

The default is 30 minutes. 0 disables the function.

 

 

 

When set to ON, the beeper sounds whenever the port

Beeper

is switched, when activating the Auto Scan function, or

when an invalid entry is made on an OSD menu. The

 

 

default is ON.

 

 

 

Allows a user to change the account password. After

Change

clicking the Change Password button, a dialog box

appears. Enter the old password. Then, enter a new

Password

password and confirm it by entering it again. Press OK

 

 

to save changes, or press Cancel to discard changes.

 

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Console KVM Switch With IP Access Table of Contents Log Server Warranty Warranty RegistrationJava Client Log FileIntroduction Package ContentsFCC Information User NoticePS/2 mouse and keyboard ports 6-pin Mini-DIN USB port FeaturesSupports Radius server authentication System RequirementsStandard Rack Mounting, for details ComponentsKeyboard Module See Keyboard Module, section LCD module so you can slide it awayLCD Module Rack Mounting InstallationGeneral Safety Instructions Never spill liquid of any kind on the deviceStandard Rack Mounting Single-Stage InstallationTwo-Stage Installation Power on the second stage KVM switchesOpening the Console Basic OperationClosing the Console LCD OSD ConfigurationAdjustment Settings Using the front handle, push the module all the wayAdministration Choice Meaning MainPort Operation Scroll Lock Scroll Lock or Ctrl Ctrl. Since ConfigurationSetting Function As Quick View Ports Quick View + Powered onHeading Description AdministrationGeneral DescriptionHttp Access PortLog Server Field ExplanationDNS Server Check Enable RadiusRadius Server Access Rights Network Transfer Rate IP AddressUSM0 All Default Webpage NameIP and MAC Filtering 192.168.0.126/abcdefgIP Access cannot be pinged AdministationLogin Failures Working ModeLog KVM switchUpgrading the Firmware To set the time, use the 24 hour Hhmmss formatBrowser Operation LoggingTo log in from an Internet browser Webpage Buttons Webpage LayoutWebpage Icons General Dialog BoxActivating the OSD Windows ClientClick to exit the remote view Windows Client OSDWindows Client Control Panel Dialog box. See .1, Activating the OSD, for detailsIcon Purpose Default Hotkey When you have finished keying in your sequence, Click StopGamma Adjustment Option UsageRGB User List Panel Button BarMessage Display Panel Compose PanelToolbar appears in the upper left corner of the screen OSD Toolbar IconsMultiuser Operation For additional mouse synchronization procedures, see pages Java ClientKeyboard and Mouse Considerations Java Client Control Panel Java Client OSDWindows NT / Windows WindowsWindows XP / Windows Server Windows ME / WindowsMessage Board Button Bar Log File Log File on Remote MainClicking the Exit button terminates the Java Client session Installation Log ServerStarting Up Menu bar consists of four items Events Menu has two items Search and MaintenanceMaintenance Menu BarLog Server Main Screen is divided into two main panels Log Server Main ScreenList Panel Key in the number of seconds, then click OK to finishClick Disconnect AP OperationWindows Client Term ExplanationKeyboard To connect to a port on the KVM switchFile Menu Tools MenuBox. Click Disconnect to end the session Switch remote main page displays on your monitorJava Client Ending the SessionSetting Default SpecificationsOSD Factory Default Settings Factory default settings are as followsJava Client Problems Symptom Action TroubleshootingAdministration Problems Symptom Action General Operation Problems Symptom ActionPanel Array Mode Problems Action Windows Client Problems Symptom ActionSun Systems Problems Symptom Action About HD15 Connectors WarrantyWarranty Registration Screen Resolutions Higher than 1280 x
Related manuals
Manual 3 pages 7.21 Kb

B020-016-17-IP specifications

The Tripp Lite B020-016-17-IP is a robust and versatile 16-Port KVM switch designed for managing multiple servers and workstations in a secure and efficient manner. This device is particularly suitable for data centers and network operations centers where space and efficiency are paramount.

One of the standout features of the B020-016-17-IP is its support for an IP-based remote access functionality, allowing users to control their KVM switch from anywhere over the internet. This is particularly useful for IT administrators who need to manage servers without being physically present, enhancing flexibility and operational efficiency. With this feature, users can easily switch between different servers using a web-based interface.

The B020-016-17-IP supports a wide variety of multimedia formats and audio connections, ensuring that users have a comprehensive experience regardless of their specific setup requirements. This switch is equipped with a standard VGA input, allowing for high-resolution display support, while also protecting against signal degradation. The switch also features USB connectivity for seamless integration with various peripherals.

Another key characteristic of the B020-016-17-IP is its reliable performance, featuring a metal housing that ensures durability and optimal heat dissipation. Users can expect minimal downtime and extended device longevity. The unit is equipped with hot-swappable capabilities, making it easy to replace devices or add new ones without interrupting operations.

Security features are also paramount in this design. The B020-016-17-IP provides a comprehensive range of security protocols, including support for password protection and user authentication, making it suitable for environments where data integrity and confidentiality are crucial.

In terms of installation, the B020-016-17-IP is user-friendly, allowing for a straightforward setup process. It includes various connection options, ensuring compatibility with a wide range of systems and infrastructures.

Overall, the Tripp Lite B020-016-17-IP 16-Port KVM switch combines advanced technology, security, and convenience to offer a powerful solution for remote server management. Whether for small businesses or large enterprises, this KVM switch is an excellent choice for enhancing productivity and streamlining IT operations.
Top Page Image Contents