Tripp Lite B020-016-17-IP IP and MAC Filtering, Default Webpage Name, 192.168.0.126/abcdefg

Page 19

7.Administration (continued)

7.6Administration Page (continued)

7.6.4Radius (continued)

Character Meaning

 

Turns the beeper on or off.

UBUZ

UBUZ0: Beeper Off

 

UBUZ1: Beeper On

 

Sets the Logout Timeout. When there is no input from the

 

user for the amount of time set with this function, the user is

ULT

automatically logged out and will need to log in again. The

valid Logout Timeout range is from 0-180 minutes.

 

 

Syntax: ULTn (where n represents a number from 0-180

 

minutes)

 

Selects which computers the user can access under Auto

 

Scan Mode.

USM

USM0: All

USM1: Powered On

 

 

USM2: Quick View

 

USM3: Quick View + Powered On

 

Determines the length of time in seconds the KVM focus

UST

dwells on each port in Auto Scan Mode.

 

Syntax: USTn (where n represents a number from 0-255)

Note: Characters are not case sensitive. Upper or lower case works equally well. Characters are comma delimited. An invalid character in the configuration string will prohibit access to the KVM switch for the user.

7.6.5 Security

The Security page controls access to the NetDirector Console KVM Switch with IP Access.

IP and MAC Filtering

If any filters have been configured, they appear in the IP Filter and/or MAC Filter list boxes.

IP and MAC Filters control access to the KVM switch based on the IP and/or MAC addresses of the computers attempting to connect. A maximum of 100 IP filters and 100 MAC filters are allowed. To enable IP and/or MAC filtering, Click the IP Filter Enable and/or MAC Filter Enable checkbox.

If the include button is checked, all the addresses within the filter range are allowed access; all other addresses are denied access.

If the exclude button is checked, all the addresses within the filter range are denied access; all other addresses are allowed access.

To add a filter, click New. A dialog box similar to the ones below appears:

 

Examples:

 

 

 

 

Character

 

Meaning

 

 

 

 

 

c,w

 

User has administrator privileges; user can access the sys-

 

 

 

tem via the Windows Client.

 

 

 

 

 

 

 

 

User can access the system via the Windows Client; user can

 

 

w,j,l

 

access the system via the Java Client; user can access log

 

 

 

 

information via the user’s Web browser.

 

Note: Each IP filter can consist of a single address, or a range of addresses. To filter a single IP address, key in the same address in both the From and To fields. To filter a continuous range of IP addresses, key in the start of the range in the From field; key in the end of the range in the To field.

After you specify the filter addresses, click OK.

To delete a filter, select it in the IP Filter and/or MAC Filter list boxes and click Remove.

To modify a filter, select it in the IP Filter and/or MAC Filter list boxes and click Edit. The Edit dialog box is similar to the New dialog box. When it comes up, simply delete the old address and replace it with the new one.

Default Webpage Name

The Default web page name entry field lets the Administrator specify a login string (in addition to the IP address) that the user must include when accessing the KVM switch with a browser. For example:

192.168.0.126/abcdefg

The user must include the forward slash and the string along with the IP address. For security purposes, we recommend that you change this string from time to time.

Note: If no string is specified here, anyone will be able to access the KVM switch with the Web browser using the IP address alone. This makes your installation less secure.

19

Image 19
Contents Console KVM Switch With IP Access Table of Contents Log Server Warranty Warranty RegistrationJava Client Log FileIntroduction Package ContentsFCC Information User NoticePS/2 mouse and keyboard ports 6-pin Mini-DIN USB port FeaturesSupports Radius server authentication System RequirementsStandard Rack Mounting, for details ComponentsKeyboard Module See Keyboard Module, section LCD module so you can slide it awayLCD Module Rack Mounting InstallationGeneral Safety Instructions Never spill liquid of any kind on the deviceStandard Rack Mounting Single-Stage InstallationTwo-Stage Installation Power on the second stage KVM switchesOpening the Console Basic OperationClosing the Console LCD OSD ConfigurationAdjustment Settings Using the front handle, push the module all the wayAdministration Choice Meaning MainPort Operation Scroll Lock Scroll Lock or Ctrl Ctrl. Since ConfigurationSetting Function As Quick View Ports Quick View + Powered onHeading Description AdministrationGeneral DescriptionHttp Access PortLog Server Field ExplanationDNS Server Check Enable RadiusRadius Server Access Rights Network Transfer Rate IP AddressUSM0 All Default Webpage NameIP and MAC Filtering 192.168.0.126/abcdefgIP Access cannot be pinged AdministationLogin Failures Working ModeLog KVM switchUpgrading the Firmware To set the time, use the 24 hour Hhmmss formatLogging Browser OperationTo log in from an Internet browser Webpage Buttons Webpage LayoutWebpage Icons General Dialog BoxActivating the OSD Windows ClientClick to exit the remote view Windows Client OSDWindows Client Control Panel Dialog box. See .1, Activating the OSD, for detailsIcon Purpose Default Hotkey When you have finished keying in your sequence, Click StopOption Usage Gamma AdjustmentRGB User List Panel Button BarMessage Display Panel Compose PanelToolbar appears in the upper left corner of the screen OSD Toolbar IconsMultiuser Operation Java Client For additional mouse synchronization procedures, see pagesKeyboard and Mouse Considerations Java Client Control Panel Java Client OSDWindows NT / Windows WindowsWindows XP / Windows Server Windows ME / WindowsMessage Board Button Bar Log File on Remote Main Log FileClicking the Exit button terminates the Java Client session Log Server InstallationStarting Up Menu bar consists of four items Events Menu has two items Search and MaintenanceMaintenance Menu BarLog Server Main Screen is divided into two main panels Log Server Main ScreenList Panel Key in the number of seconds, then click OK to finishClick Disconnect AP OperationWindows Client Term ExplanationKeyboard To connect to a port on the KVM switchFile Menu Tools MenuBox. Click Disconnect to end the session Switch remote main page displays on your monitorJava Client Ending the SessionSetting Default SpecificationsOSD Factory Default Settings Factory default settings are as followsJava Client Problems Symptom Action TroubleshootingAdministration Problems Symptom Action General Operation Problems Symptom ActionWindows Client Problems Symptom Action Panel Array Mode Problems ActionSun Systems Problems Symptom Action About HD15 Connectors WarrantyWarranty Registration Screen Resolutions Higher than 1280 x
Related manuals
Manual 3 pages 7.21 Kb

B020-016-17-IP specifications

The Tripp Lite B020-016-17-IP is a robust and versatile 16-Port KVM switch designed for managing multiple servers and workstations in a secure and efficient manner. This device is particularly suitable for data centers and network operations centers where space and efficiency are paramount.

One of the standout features of the B020-016-17-IP is its support for an IP-based remote access functionality, allowing users to control their KVM switch from anywhere over the internet. This is particularly useful for IT administrators who need to manage servers without being physically present, enhancing flexibility and operational efficiency. With this feature, users can easily switch between different servers using a web-based interface.

The B020-016-17-IP supports a wide variety of multimedia formats and audio connections, ensuring that users have a comprehensive experience regardless of their specific setup requirements. This switch is equipped with a standard VGA input, allowing for high-resolution display support, while also protecting against signal degradation. The switch also features USB connectivity for seamless integration with various peripherals.

Another key characteristic of the B020-016-17-IP is its reliable performance, featuring a metal housing that ensures durability and optimal heat dissipation. Users can expect minimal downtime and extended device longevity. The unit is equipped with hot-swappable capabilities, making it easy to replace devices or add new ones without interrupting operations.

Security features are also paramount in this design. The B020-016-17-IP provides a comprehensive range of security protocols, including support for password protection and user authentication, making it suitable for environments where data integrity and confidentiality are crucial.

In terms of installation, the B020-016-17-IP is user-friendly, allowing for a straightforward setup process. It includes various connection options, ensuring compatibility with a wide range of systems and infrastructures.

Overall, the Tripp Lite B020-016-17-IP 16-Port KVM switch combines advanced technology, security, and convenience to offer a powerful solution for remote server management. Whether for small businesses or large enterprises, this KVM switch is an excellent choice for enhancing productivity and streamlining IT operations.