Tripp Lite B020-016-17-IP owner manual Components, Keyboard Module See Keyboard Module, section

Page 6

4.Introduction (continued)

4.3System Requirements (continued)

4.3.5 Converters and Adapters

Use a B015-000 PS/2 to USB Adapter to convert any P774-Series PS/2 KVM Cable kit for use with a USB computer/server.

4.3.6 Operating Systems

Supported operating systems are shown in the table, below:

Operating System

Versions Supported

Windows

2000 and higher

Linux RedHat

6.0 and higher

Linux SuSE

8.2 and higher

Linux Mandriva (Mandrake)

9.0 and higher

UNIX AIX

4.3 and higher

UNIX Free BSD

3.51 and higher

Operating System

Versions Supported

UNIX Sun

Solaris 8 and higher

Novell Netware

5.0 and higher

Mac

8.6 and higher

OS/2

Warp and higher

DOS

6.2 and higher

4.4 Components

4.4.1Front View

1Upper Handle: Pull to slide the LCD module out; push to slide the module in.

2LCD Module: See LCD Module, section 4.4.3

 

Keyboard Module: See Keyboard Module, section 4.4.2

2

3

 

 

Lower Handle: Pull to slide the keyboard module out; push to slide

 

4

 

 

the module in.

 

 

Power LED: Lights (blue) to indicate that the unit is receiving

 

5

 

 

power.

 

 

Keyboard Release Catch: These catches (one on each side) release

3

6

 

the keyboard module so you can slide it away.

 

7LCD Release Catch: These catches (one on each side) release the

LCD module so you can slide it away.

8Rack Mounting Tabs: The rack mounting tabs located at each corner of the unit secure the chassis to a system rack. See section 5.2,

Standard Rack Mounting, for details.

 

Console Release Tabs: These tabs (one on each side) must be

4

9

 

 

pressed inward to release the LCD and keyboard module, allowing

5

 

them to be pulled out of the rack.

 

 

4.4.2Keyboard Module

1Port LEDs: An On Line LED lights (amber) to indicate that the device attached to its corresponding port is up and running. A Selected LED lights (green) to indicate that the computer attached to its corresponding port has the KVM focus.

2Keyboard: 99-key keyboard

3Touchpad: Standard mouse touchpad

4Reset Switch: Pressing and holding this switch in while powering on the unit causes the KVM switch to revert to the original factory installed firmware version – allowing you to recover from a failed firmware upgrade. Pressing and holding this switch in for more than three seconds performs a system reset.

Note: The switch is recessed and must be pushed with a thin object – such as the end of a paper clip or a ballpoint pen.

5Port Selection Switches: The left button (DOWN), shifts the KVM focus down through the ports (Port 7 → Port 6, etc.). After Port 1, it cycles back to the last port. The right button (UP), shifts the KVM focus up through the ports. After the last port, it cycles to Port 1.

1

9

8

7

6

6Connection LEDs: The Link LED flashes (green) when a remote client connects to the KVM switch. The 10/100 Mbps LED lights (orange) to indicate 10 Mbps data transmission speed. It lights (green) for 100 Mbps.

7External Mouse Port: This PS/2-type mouse port is provided for users who prefer to use an external mouse.

8Lock LEDs: The Num Lock, Caps Lock, Scroll Lock LEDs are located here.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Console KVM Switch With IP Access Table of Contents Log File Warranty Warranty RegistrationJava Client Log ServerUser Notice Package ContentsFCC Information IntroductionSystem Requirements FeaturesSupports Radius server authentication PS/2 mouse and keyboard ports 6-pin Mini-DIN USB portLCD module so you can slide it away ComponentsKeyboard Module See Keyboard Module, section Standard Rack Mounting, for detailsLCD Module Never spill liquid of any kind on the device InstallationGeneral Safety Instructions Rack MountingPower on the second stage KVM switches Single-Stage InstallationTwo-Stage Installation Standard Rack MountingBasic Operation Opening the ConsoleUsing the front handle, push the module all the way LCD OSD ConfigurationAdjustment Settings Closing the ConsoleAdministration Main Choice MeaningPort Operation As Quick View Ports Quick View + Powered on ConfigurationSetting Function Scroll Lock Scroll Lock or Ctrl Ctrl. SinceDescription AdministrationGeneral Heading DescriptionField Explanation Access PortLog Server HttpIP Address Check Enable RadiusRadius Server Access Rights Network Transfer Rate DNS Server192.168.0.126/abcdefg Default Webpage NameIP and MAC Filtering USM0 AllWorking Mode AdministationLogin Failures IP Access cannot be pingedTo set the time, use the 24 hour Hhmmss format KVM switchUpgrading the Firmware LogBrowser Operation LoggingTo log in from an Internet browser General Dialog Box Webpage LayoutWebpage Icons Webpage ButtonsWindows Client Activating the OSDDialog box. See .1, Activating the OSD, for details Windows Client OSDWindows Client Control Panel Click to exit the remote viewWhen you have finished keying in your sequence, Click Stop Icon Purpose Default HotkeyGamma Adjustment Option UsageRGB Compose Panel Button BarMessage Display Panel User List PanelOSD Toolbar Icons Toolbar appears in the upper left corner of the screenMultiuser Operation For additional mouse synchronization procedures, see pages Java ClientKeyboard and Mouse Considerations Java Client OSD Java Client Control PanelWindows ME / Windows WindowsWindows XP / Windows Server Windows NT / WindowsMessage Board Button Bar Log File Log File on Remote MainClicking the Exit button terminates the Java Client session Installation Log ServerStarting Up Menu Bar Events Menu has two items Search and MaintenanceMaintenance Menu bar consists of four itemsKey in the number of seconds, then click OK to finish Log Server Main ScreenList Panel Log Server Main Screen is divided into two main panelsTerm Explanation AP OperationWindows Client Click DisconnectTools Menu To connect to a port on the KVM switchFile Menu KeyboardEnding the Session Switch remote main page displays on your monitorJava Client Box. Click Disconnect to end the sessionFactory default settings are as follows SpecificationsOSD Factory Default Settings Setting DefaultGeneral Operation Problems Symptom Action TroubleshootingAdministration Problems Symptom Action Java Client Problems Symptom ActionPanel Array Mode Problems Action Windows Client Problems Symptom ActionSun Systems Problems Symptom Action Screen Resolutions Higher than 1280 x WarrantyWarranty Registration About HD15 Connectors
Related manuals
Manual 3 pages 7.21 Kb

B020-016-17-IP specifications

The Tripp Lite B020-016-17-IP is a robust and versatile 16-Port KVM switch designed for managing multiple servers and workstations in a secure and efficient manner. This device is particularly suitable for data centers and network operations centers where space and efficiency are paramount.

One of the standout features of the B020-016-17-IP is its support for an IP-based remote access functionality, allowing users to control their KVM switch from anywhere over the internet. This is particularly useful for IT administrators who need to manage servers without being physically present, enhancing flexibility and operational efficiency. With this feature, users can easily switch between different servers using a web-based interface.

The B020-016-17-IP supports a wide variety of multimedia formats and audio connections, ensuring that users have a comprehensive experience regardless of their specific setup requirements. This switch is equipped with a standard VGA input, allowing for high-resolution display support, while also protecting against signal degradation. The switch also features USB connectivity for seamless integration with various peripherals.

Another key characteristic of the B020-016-17-IP is its reliable performance, featuring a metal housing that ensures durability and optimal heat dissipation. Users can expect minimal downtime and extended device longevity. The unit is equipped with hot-swappable capabilities, making it easy to replace devices or add new ones without interrupting operations.

Security features are also paramount in this design. The B020-016-17-IP provides a comprehensive range of security protocols, including support for password protection and user authentication, making it suitable for environments where data integrity and confidentiality are crucial.

In terms of installation, the B020-016-17-IP is user-friendly, allowing for a straightforward setup process. It includes various connection options, ensuring compatibility with a wide range of systems and infrastructures.

Overall, the Tripp Lite B020-016-17-IP 16-Port KVM switch combines advanced technology, security, and convenience to offer a powerful solution for remote server management. Whether for small businesses or large enterprises, this KVM switch is an excellent choice for enhancing productivity and streamlining IT operations.
Top Page Image Contents