SETTING OVEN CONTROLS

Adjusting the oven temperature

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed.

The oven temperature may be increased +35°F (+19°C) or decreased -35°F (-19°C) from the factory settings.

Example: increase the oven temperature by 30°F:

Step

Press

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press start.

Example: decrease the oven temperature by 30°F:

Step

Press

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press self-clean.

4.Press start.

NOTES

Oven temperature adjustments made will not affect the broil or self-cleaning feature temperatures.

If the temperature shows an adjustment of -30°F, and a +30°F adjustment is needed, you can toggle between the (-) or (+) in the display by pressing self clean.

DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40 degrees from actual temperatures.

Restoring factory default settings

When new, your appliance left the factory with predetermined oven control default settings. Over time, the user may make changes to these settings. The following options have user preferences that could be modified and may have been changed since the appliance was new:

•12 or 24 hour display mode

•Continuous bake or 6-Hour Energy Savings mode

•Silent control panel

•Oven temperature display (Fahrenheit or Celsius)

•Adjusting the oven temperature

•My favorite

Please remember that if you choose to restore, ALL of the above preferences will be restored to factory default settings, the oven temperature offset will reset and any stored information will be cleared.

To restore all user settings to factory default:

Step

Press

1.Press and hold 7 key pad until first beep sounds (about 6 seconds).

2.Press start.

Operating the oven light

The interior oven light will automatically turn ON when the oven door is opened.

Press

to turn the interior oven light ON and OFF

whenever the oven door is closed.

The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield. The glass shield must be in place whenever the oven is in use.

The shield will protect the halogen bulb from food splatters.

To change the interior oven light, see "Changing the oven light" in the Care & Cleaning section.

28

Page 27 Page 29
Page 28
Image 28
Frigidaire FPIF3093LF Adjusting the oven temperature, Restoring factory default settings, Operating the oven light
Page 27 Page 29

FPIF3093LF specifications

The Frigidaire FPIF3093LF is a cutting-edge induction range that combines modern technology with user-friendly features, making it a standout choice for any kitchen. This electric range not only enhances the cooking experience but also promotes energy efficiency, ensuring that every meal is prepared with ease and precision.

At the heart of the FPIF3093LF is its induction cooking technology. Unlike traditional gas or electric stovetops, induction cooktops use magnetic fields to directly heat pots and pans, leading to faster cooking times and precise temperature control. This feature not only saves time but also reduces energy consumption, as heat is generated only where it is needed, resulting in less wasted energy.

The range is equipped with a spacious oven that boasts a generous capacity, allowing users to bake multiple dishes simultaneously or cook large meals without hassle. The true convection technology further enhances baking performance by circulating hot air throughout the oven, ensuring even cooking results no matter the dish. This feature is particularly beneficial for bakers, providing consistent temperatures for perfectly baked goods.

For added convenience, the Frigidaire FPIF3093LF comes with a variety of cooking presets and functions. With options such as self-cleaning, broiling, and delay start, users can easily customize their cooking experience to fit their schedules and preferences. The smooth-top induction surface is also easy to clean, as spills and splatters do not bake onto the cooktop, making post-meal cleanup a breeze.

Safety is another paramount consideration in the design of this range. With features like automatic shut-off and a hot surface indicator, users can cook with confidence, knowing that the appliance is designed with their safety in mind.

Aesthetically, the Frigidaire FPIF3093LF is sleek and modern, featuring a stainless steel finish that fits beautifully in any contemporary kitchen. The intuitive control panel is user-friendly, making it easy for cooks of all skill levels to navigate through its features.

In summary, the Frigidaire FPIF3093LF is an exceptional induction range that brings together advanced cooking technology, safety features, and stylish design. Whether preparing a quick weeknight dinner or a grand feast, this appliance meets the demands of modern cooking with efficiency and finesse.
Top Page Image Contents