Moxa Technologies PT-7728 user manual Coupling Mode, Primary/Backup Port

Page 40

PT-7728 User’s Manual

Featured Functions

*Both Ring 1 and Ring 2 must be enabled when using the dual-ring architecture.

Set as Master

	Setting	Description	Factory Default
	Enabled	The PT-7728 is manually selected
	Enabled	as the master.
		as the master.	Not checked
		The Turbo Ring or Turbo Ring V2	Not checked
	Disabled	protocol will automatically select
		the master.
	Redundant Ports

	Setting	Description	Factory Default
	1st Port	This specifies which port on the	None
	1st Port	PT-7728 will be used as the first	None
		redundant port.
	2nd Port	This specifies which port on the	None
	2nd Port	PT-7728 will be used as the second	None
		redundant port.
	Enable Ring Coupling

	Setting	Description	Factory Default
	Enable	This specifies that this PT-7728
	Enable	will be a ring coupler.	Not checked
		will be a ring coupler.
	Disable	This specifies that this PT-7728 is
		This specifies that this PT-7728 is
		not a ring coupler.
		not a ring coupler.
	Coupling Mode
	Setting	Description	Factory Default
	Dual Homing	This enables dual homing through	None
	Dual Homing	the PT-7728.	None
		the PT-7728.
	Ring Coupling	This specifies that the PT-7728 will
	Ring Coupling	be used for a ring coupling backup	None
	(backup)	be used for a ring coupling backup	None
	(backup)	connection.
		connection.
	Ring Coupling	This specifies that the PT-7728 will	None
	(primary)	be used for a ring coupling primary	None
		connection.
	Primary/Backup Port
	Setting	Description	Factory Default
	Primary Port	This specifies which port on the	None
	Primary Port	PT-7728 will be used as primary	None
		port.
	Backup Port	This specifies which port on the	None
	Backup Port	PT-7728 will be used as the backup	None
		port.

3-26

Image 40

Contents Moxa PowerTrans Switch PT-7728 User’s Manual First Edition, February Moxa IncTrademarks Copyright NoticeDisclaimer Table of Contents Appendix a MIB Groups Appendix B Specifications ‰ Overview ‰ Package Checklist ‰ Software Features IntroductionSoftware Features Package ChecklistOverview Getting Started Serial Console Configuration 115200, None, 8, 1, VT100 PT-7728 User’s Manual Getting Started Configuration by Telnet Console Key FunctionPT-7728 User’s Manual Getting Started PT-7728 User’s Manual Getting Started Configuration by Web Browser Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationPassword PasswordAccount Accessible IP Grant access to one host with a specific IP addressGrant access to any host on a specific subnetwork Hosts That Need Access Input FormatEnable PortDescription NameSpeed NetworkFDX Flow Ctrl Auto IP Configuration Switch IP AddressSwitch Subnet Mask Default GatewayTime Daylight Saving TimeCurrent Time Current DateSystem File Update-By Remote Tftp Configuration Files Path and Name Tftp Server IP/NameFirmware Files Path and Name Log Files Path and NameSystem File Update-By Local Import/Export Factory DefaultUsing Port Trunking Port Trunking ConceptConfiguring Port Trunking Trunk Group Maximum of 4 trunk groupsTrunk Type Available Ports/Member PortsSetting Description Configuring SnmpTrunk Table Snmp Read/Write Settings Snmp VersionsV1, V2c Read Community V1, V2c Write/Read CommunitySetting Description Factory Default 1st Trap Server IP/Name Setting Description Factory DefaultUsing Communication Redundancy Private MIB informationInitial setup for Turbo Ring or Turbo Ring Turbo Ring ConceptTurbo Ring with odd number switches Ring Coupling Configuration Determining the Redundant Path for Turbo RingSwitch B Dual-Homing Configuration for Turbo Ring Configuring Turbo Ring and Turbo RingConfiguring Turbo Ring Now Active Master/Slave Redundancy Protocol Set as MasterCoupling Port Enable Ring CouplingCoupling Control Port Enable Ring Ring 1/2-StatusRing 1/2-1st Ring Port Status Ring 1/2-2nd Ring Port Status Coupling-ModeCoupling Mode Primary/Backup PortWhat is STP? STP/RSTP ConceptPT-7728 User’s Manual Featured Functions STP Configuration How STP WorksSTP Requirements Port Speed Path Cost 802.1D Edition 802.1w-2001Differences between Rstp and STP STP ReconfigurationSTP Example Using STP on a Network with Multiple VLANs Configuring STP/RSTP Root/Not RootProtocol of Redundancy Bridge PriorityForwarding Delay Enable STP per PortHello Time sec Max. Age secUsing Traffic Prioritization Configuration Limits of RSTP/STPWhat is Traffic Prioritization? Traffic Prioritization ConceptHow Traffic Prioritization Works Ieee 802.1p Priority Level Ieee 802.1D Traffic TypeTraffic Prioritization Differentiated Services DiffServ Traffic MarkingTraffic Queues Configuring Traffic Prioritization QoS ClassificationQueuing Mechanism Inspect TOSSetting Description Factory CoS MappingTOS/DiffServ Mapping Inspect COSWhat is a VLAN? Using Virtual LANVirtual LAN Vlan Concept VLANs and the PowerTrans Benefits of VLANsManaging a Vlan Communication Between VLANsSample Applications of VLANs using PT-7728 VLANs Tagged and Untagged MembershipPT-7728 User’s Manual Featured Functions Configuring Virtual LAN Vlan SettingsManagement Vlan ID Port TypeUsing Multicast Filtering What is an IP Multicast?Concept of Multicast Filtering Vlan TableMulticast Filtering Benefits of MulticastNetwork without multicast filtering Multicast Filtering and Moxa PowerTrans Switch Igmp Internet Group Management Protocol Snooping ModeQuery Mode Network with multicast filteringConfiguring Igmp Snooping Igmp Multicast FilteringGmrp Garp Multicast Registration Protocol Static Multicast MACIgmp Snooping Settings Add Static Multicast MAC Using Bandwidth Management Configuring GmrpGmrp enable Gmrp TableTraffic Rate Limiting Settings Configuring Bandwidth Management Broadcast Storm ProtectionIngress Using Port Access Control Configuring Static Port LockStatic Port Lock IeeeConfiguring Ieee Database OptionRadius Server Server Port802.1X Re-Authentication Local User Database SetupPort Access Control Table Using Auto WarningLocal User Database Setup Configuring Email Warning Event TypeEmail Setup MoxaPowerTransSwitch0001@SwitchLocationPort Events Mail Server IP/NameConfiguring Relay Warning Password SettingAccount Name Email AddressEvent Setup Using Line-Swap-Fast-Recovery Using Set Device IPConfiguring Line-Swap Fast Recovery Override relay alarm settingsConfiguring Set Device IP Set up the connected devicesUsing Diagnosis Mirror PortMonitor by Switch Using MonitorPing Using the MAC Address Table Monitor by PortUsing Event Log MACUsing Syslog Syslog ServerPT-7728 User’s Manual Featured Functions MIB II.1 System Group MIB II.2 Interfaces GroupMIB II.4 IP Group MIB II.5 Icmp GroupMIB II.11 Snmp Group MIB II.10 Transmission GroupMIB II.17 dot1dBridge Group Public Traps Private TrapsTechnology Switch PropertiesInterface Power Optical Fiber 100BaseFXMechanical WarrantyEnvironmental