Moxa Technologies PT-7728 user manual Setting Description Factory Default

Page 30

PT-7728 User’s Manual					Featured Functions
Admin Auth. Type (for SNMP V1, V2c, V3, and V3 only)

		Setting	Description		Factory Default
	No-Auth		This allows the admin account to access		No
	No-Auth		objects without authentication.		No
			objects without authentication.
	MD5-		Authentication will be based on the
	MD5-		HMAC-MD5 algorithms. 8-character		No
	Auth		passwords are the minimum requirement		No
	Auth		passwords are the minimum requirement
			for authentication.
	SHA-		Authentication will be based on the
	SHA-		HMAC-SHA algorithms. 8-character		No
	Auth		passwords are the minimum requirement		No
	Auth		passwords are the minimum requirement
			for authentication.
Admin Data Encryption Key (for SNMP V1, V2c, V3, and V3 only)

		Setting	Description		Factory Default
	Enable		This enables data encryption using the		No
	Enable		specified data encryption key (between 8		No
			and 30 characters).
	Disable		This specifies that data will not be		No
	Disable		encrypted.		No
			encrypted.
User Auth. Type (for SNMP V1, V2c, V3 and V3 only)
		Setting	Description		Factory Default
			This allows the admin account and user
	No-Auth		account to access objects without		No
			authentication.
			Authentication will be based on the
	MD5-Auth		HMAC-MD5 algorithms. 8-character		No
	MD5-Auth		passwords are the minimum requirement		No
			passwords are the minimum requirement
			for authentication.
			Authentication will be based on the
	SHA-Auth		HMAC-SHA algorithms. 8-character		No
	SHA-Auth		passwords are the minimum requirement		No
			passwords are the minimum requirement
			for authentication.
User Data Encryption Key (for SNMP V1, V2c, V3 and V3 only)

		Setting	Description		Factory Default
		Enable	This enables data encryption using the		No
		Enable	specified data encryption key (between 8		No
			and 30 characters).
		Disable	No data encryption		No
Trap Settings
1st Trap Server IP/Name
		Setting	Description		Factory Default
	IP or name		This specifies the IP address or name of		None
	IP or name		the primary trap server used by your		None
			network.

3-16

Image 30

Contents Moxa PowerTrans Switch PT-7728 User’s Manual First Edition, February Moxa IncCopyright Notice TrademarksDisclaimer Table of Contents Appendix a MIB Groups Appendix B Specifications ‰ Overview ‰ Package Checklist ‰ Software Features IntroductionPackage Checklist Software FeaturesOverview Getting Started Serial Console Configuration 115200, None, 8, 1, VT100 PT-7728 User’s Manual Getting Started Configuration by Telnet Console Key FunctionPT-7728 User’s Manual Getting Started PT-7728 User’s Manual Getting Started Configuration by Web Browser Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationPassword PasswordAccount Grant access to any host on a specific subnetwork Accessible IPGrant access to one host with a specific IP address Hosts That Need Access Input FormatDescription EnablePort NameNetwork SpeedFDX Flow Ctrl Switch Subnet Mask Auto IP ConfigurationSwitch IP Address Default GatewayCurrent Time TimeDaylight Saving Time Current DateSystem File Update-By Remote Tftp Firmware Files Path and Name Configuration Files Path and NameTftp Server IP/Name Log Files Path and NameSystem File Update-By Local Import/Export Factory DefaultUsing Port Trunking Port Trunking ConceptTrunk Type Configuring Port TrunkingTrunk Group Maximum of 4 trunk groups Available Ports/Member PortsConfiguring Snmp Setting DescriptionTrunk Table V1, V2c Read Community Snmp Read/Write SettingsSnmp Versions V1, V2c Write/Read CommunitySetting Description Factory Default 1st Trap Server IP/Name Setting Description Factory DefaultUsing Communication Redundancy Private MIB informationInitial setup for Turbo Ring or Turbo Ring Turbo Ring ConceptTurbo Ring with odd number switches Ring Coupling Configuration Determining the Redundant Path for Turbo RingSwitch B Configuring Turbo Ring and Turbo Ring Dual-Homing Configuration for Turbo RingConfiguring Turbo Ring Redundancy Protocol Now ActiveMaster/Slave Set as MasterEnable Ring Coupling Coupling PortCoupling Control Port Ring 1/2-1st Ring Port Status Ring 1/2-2nd Ring Port Status Enable RingRing 1/2-Status Coupling-ModeCoupling Mode Primary/Backup PortWhat is STP? STP/RSTP ConceptPT-7728 User’s Manual Featured Functions STP Requirements STP ConfigurationHow STP Works Port Speed Path Cost 802.1D Edition 802.1w-2001STP Reconfiguration Differences between Rstp and STPSTP Example Using STP on a Network with Multiple VLANs Protocol of Redundancy Configuring STP/RSTPRoot/Not Root Bridge PriorityHello Time sec Forwarding DelayEnable STP per Port Max. Age secWhat is Traffic Prioritization? Using Traffic PrioritizationConfiguration Limits of RSTP/STP Traffic Prioritization ConceptHow Traffic Prioritization Works Ieee 802.1p Priority Level Ieee 802.1D Traffic TypeDifferentiated Services DiffServ Traffic Marking Traffic PrioritizationTraffic Queues Queuing Mechanism Configuring Traffic PrioritizationQoS Classification Inspect TOSTOS/DiffServ Mapping Setting Description FactoryCoS Mapping Inspect COSUsing Virtual LAN What is a VLAN?Virtual LAN Vlan Concept Managing a Vlan VLANs and the PowerTransBenefits of VLANs Communication Between VLANsSample Applications of VLANs using PT-7728 VLANs Tagged and Untagged MembershipPT-7728 User’s Manual Featured Functions Management Vlan ID Configuring Virtual LANVlan Settings Port TypeConcept of Multicast Filtering Using Multicast FilteringWhat is an IP Multicast? Vlan TableBenefits of Multicast Multicast FilteringNetwork without multicast filtering Query Mode Multicast Filtering and Moxa PowerTrans SwitchIgmp Internet Group Management Protocol Snooping Mode Network with multicast filteringGmrp Garp Multicast Registration Protocol Configuring Igmp SnoopingIgmp Multicast Filtering Static Multicast MACIgmp Snooping Settings Add Static Multicast MAC Gmrp enable Using Bandwidth ManagementConfiguring Gmrp Gmrp TableConfiguring Bandwidth Management Broadcast Storm Protection Traffic Rate Limiting SettingsIngress Static Port Lock Using Port Access ControlConfiguring Static Port Lock IeeeRadius Server Configuring IeeeDatabase Option Server Port802.1X Re-Authentication Local User Database SetupUsing Auto Warning Port Access Control TableLocal User Database Setup Configuring Email Warning Event TypePort Events Email SetupMoxaPowerTransSwitch0001@SwitchLocation Mail Server IP/NameAccount Name Configuring Relay WarningPassword Setting Email AddressEvent Setup Configuring Line-Swap Fast Recovery Using Line-Swap-Fast-RecoveryUsing Set Device IP Override relay alarm settingsConfiguring Set Device IP Set up the connected devicesUsing Diagnosis Mirror PortUsing Monitor Monitor by SwitchPing Using the MAC Address Table Monitor by PortUsing Event Log MACUsing Syslog Syslog ServerPT-7728 User’s Manual Featured Functions MIB II.4 IP Group MIB II.1 System GroupMIB II.2 Interfaces Group MIB II.5 Icmp GroupMIB II.10 Transmission Group MIB II.11 Snmp GroupMIB II.17 dot1dBridge Group Public Traps Private TrapsSwitch Properties TechnologyInterface Power Optical Fiber 100BaseFXWarranty MechanicalEnvironmental