Moxa Technologies PT-7728 Configuring Port Trunking, Trunk Group Maximum of 4 trunk groups

PT-7728 User’s Manual Featured Functions

Configuring Port Trunking

The Port Trunking Settings page is where ports are assigned to a trunk group.

Step 1: Select the desired Trunk Group (Trk1, Trk2, Trk3, Trk4).

Step 2: Select the Trunk Type (Static or LACP).

Step 3: Select the desired ports under Available Ports and click Up to add to the Trunk Group.

Step 4: Select the desired ports under Member Ports and click Down to remove from the group.

Trunk Group (Maximum of 4 trunk groups)

Setting	Description	Factory Default
Trk1, Trk2, Trk3, Trk4	This specifies the current trunk group.	Trk1
Trunk Type
Setting	Description	Factory Default
Static	This selects Moxa's proprietary trunking protocol.	Static
LACP	This selects LACP (IEEE 802.3ad, Link	Static
	Aggregation Control Protocol).
Available Ports/Member Ports
Setting	Description	Factory Default
Member/available ports	This lists the ports in the current trunk group and the	N/A
	ports that are available to be added.
Check box	This selects the port to be added or removed from	Unchecked
	the group.
Port	This is how each port is identified.	N/A
Port description	This displays the media type for each port.	N/A
Name	This displays the specified name for each port.	N/A
Speed	This indicates the transmission speed for each port	N/A
	(100M-Full, 100M-Half, 10M-Full, or 10M-Half).
FDX flow control	This indicates if the FDX flow control of this port is	N/A
	enabled or disabled.
Up	This is used to add selected ports into the trunk	N/A
	group from available ports.
Down	This is used to remove selected ports from the trunk	N/A
	group.

3-13