Moxa Technologies NPort 6110 user manual RTS/CTS Uart Fifo

Page 34

Modbus Serial Settings

	Setting	Value	Notes
		RS-232	NPort 6110 supports
	Interface Mode
		RS-422
		RS-422	2-wire RS-485 mode.
			2-wire RS-485 mode.
		RS-485

	Baud Rate	1200 bps to 230400 bps
	Parity	None, Odd, Even,
	Parity	Space, Mark
		Space, Mark
	Data Bits	7, 8
	Stop Bit	1, 2
	Flow Control	None, Xon/Xoff,
	Flow Control	RTS/CTS
		RTS/CTS
	UART FIFO	Enable, Disable

4-13

Image 34

Contents NPort 6110 Modbus/TCP To Serial Communication Gateway NPort 6110 Modbus/TCP To Serial Communication Gateway Moxa Internet Services Table of Contents Page Introduction OverviewFeatures Powerful operation modes for versatile Modbus applicationsProduct Specifications LANPackage Checklist EnvironmentalFront/Top/Rear/Bottom Panel Views Serial Installation Power ConnectionGetting Started Ethernet Installation Software InstallationPage Page Page Page Housing DIN-RailWall Mount Typical Modbus Applications Connect all Modbus devices over the Ethernet network… Link the Serial Master device with Ethernet Slave devices… Configuring Modbus Gateway Starting Modbus Gateway Configurator Broadcast Search Searching for NPortSpecify by IP Address Modify Configuration Network Settings Modbus Settings AlphanumericPage Page Advanced Modbus Settings IP address Page Modbus Serial Settings RTS/CTS Uart Fifo Password Other Functions Upgrade FirmwareUnlock Page Remote Monitoring and Management Start Log MonitorPage Troubleshooting ID No. mismatchPin Assignments DB9 Male PinoutsDeclaration of Conformity Problem Report Form NPort 6110 Modbus GatewayReturn Procedure