Moxa Technologies EDS-726 user manual Configuring Port Trunking

Page 29

EDS-726 Series User’s Manual

Featured Functions

yUp to 8 ports can be inserted into each port trunk group. EDS-726 allows a maximum of 4 “Standby” ports for each LACP trunk group. In another words, a maximum of 12 ports can belong to each LACP trunk group.

yThe same transmission speed must be assigned to all ports belonging to one port trunking group. E.g., 100M Full, 100M Half, 10M Full, or 10M Half. The auto-negotiation function should be disabled for these ports.

yFull duplex operation only—Link Aggregation is supported only on point-to-point links with MACs operating in full duplex mode.

yMultipoint Aggregations—The mechanisms specified in this clause do not support aggregations among more than two systems.

When you activate port trunking settings, some advanced functions will either be set to factory default values, or disabled:

yPort stat, such as transmitting speed, duplex, and flow control will be set to the factory defaults.

yCommunication Redundancy will be set to the factory default.

y802.1Q VLAN will be set to the factory default and will be disabled.

yMulticast Filtering will be set to the factory default.

yPort Lock will be set to the factory default and will be disabled.

ySet Device IP will be set to the factory default

yMirror Port will be set to the factory default and will be disabled.

Configuring Port Trunking

The Port Trunking Settings page is used to assign ports to a Trunk Group.

Step 1: Select Trk1, Trk2, Trk3, or Trk 4 from the Trunk Group drop-down box.

Step 2: Select Static or LACP from the Trunk Type drop-down box.

Step 3: Under Member Ports and Available Ports, checkmark to select specific ports.

Step 4: Use the Up / Down buttons to add/remove designated ports to/from a trunk group.

3-14

Image 29

Contents First Edition, July Moxa EtherDevice Switch EDS-726 Series User’s ManualDisclaimer Copyright NoticeTrademarks Table of Contents Chapter EDS Configurator GUI Introduction Features Package ChecklistOverview Industrial Networking CapabilityRecommended Software and Accessories Useful Utility and Remote ConfigurationGetting Started Connection Caution RS-232 Console Configuration 115200, None, 8, 1, VT100EDS-726 Series User’s Manual Key Function Configuration by Telnet Console Configuration by Web Browser EDS-726 Series User’s Manual Disabling Telnet and Browser Access Featured Functions System Identification Configuring Basic SettingsSwitch Name PasswordSwitch Location Switch DescriptionAccount PasswordAny host on a specific subnetwork can access the EDS-726 Accessible IPAny host can access the EDS-726 Allowable Hosts Input formatPort EnableDescription NamePort Transmission Speed NetworkFDX Flow Control Port TypeSwitch IP Address Auto IP ConfigurationSwitch Subnet Mask Default GatewayCurrent Time TimeCurrent Date System Up TimeSystem File Update-By Remote Tftp System File Update-By Local Import/Export Factory Default Using Port TrunkingSystem File Update-By CF Card Port Trunking Concept Configuring Port Trunking Trunk Group Maximum of 4 trunk groups Setting DescriptionTrunk Type Member Ports/Available PortsSnmp Configuring SnmpSnmp Versions Snmp Read/Write SettingsV1, V2c Read Community V1, V2c Write/Read CommunityTrap Server IP/Name Trap SettingsSwitch Object ID Using Communication RedundancyPrivate MIB information Gigabit Ethernet Redundant Ring Capability 300 msTurbo Ring Concept Initial SetupWhen the number of EDS-726 units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept What is STP? Port Speed Path Cost 802.1D Edition 802.1w-2001 How STP WorksSTP Requirements STP Reconfiguration STP ConfigurationDifferences between Rstp and STP STP CalculationSTP Example Using STP on a Network with Multiple VLANsConfiguring STP/RSTP Root/Not Root Forwarding DelayProtocol of Redundancy Bridge priorityEnable STP per Port Configuration Limits of RSTP/STPPort Priority Port CostWhat is Traffic Prioritization? Using Traffic PrioritizationTraffic Prioritization Concept How Traffic Prioritization WorksTraffic Prioritization Differentiated Services DiffServ Traffic MarkingIeee 802.1p Priority Level Ieee 802.1D Traffic Type Traffic Queues Configuring Traffic PrioritizationQoS Classification Queuing Mechanism Default Port PriorityInspect TOS Inspect COSTOS/DiffServ Mapping Setting Description FactoryCoS Mapping Virtual LAN Vlan Concept Using Virtual LANWhat is a VLAN? Benefits of VLANs VLANs and Moxa EtherDevice SwitchManaging a Vlan Communication Between VLANsHUB Sample Applications of VLANs using Moxa EDS-726Vlan Port Settings Configuring 802.1Q VlanPort Pvid Management Vlan IDPort Fixed Vlan List Tagged Port Forbidden Vlan ListWhat is an IP Multicast? Using Multicast FilteringConcept of Multicast Filtering Benefits of MulticastNetwork without multicast filtering Multicast FilteringIgmp Internet Group Management Protocol Snooping Mode Multicast Filtering and Moxa EtherDevice SwitchQuery Mode Igmp Multicast FilteringIgmp Snooping Settings Configuring Igmp SnoopingStatic Multicast MAC Enabling Multicast FilteringStatic Multicast Router Port Igmp SnoopingQuerier Igmp TableAdd New Static Multicast Address to the List Add Static Multicast MACNone Join PortPort Setting Description Factory Default Configuring GmrpGmrp enable Setting Description Factory Default Port Mode Setting Description Factory DefaultConfiguring Bandwidth Management Using Bandwidth ManagementGmrp Table Broadcast Storm ProtectionTraffic Rate Limiting Settings Using Port Access ControlIeee Static Port LockMessage Exchange 802.1X Configuring IeeeRadius Server Database OptionServer Port Shared Key802.1X Re-Authentication 802.1X Re-AuthenticationLocal User Database Setup 802.1X Table Local User Database SetupStatic Port Lock Email Alarm Events Settings Using Auto WarningConfiguring Email Warning Event Types MoxaEtherDeviceSwitch0001@SwitchLocationSystem Event Port EventEmail Settings Relay Alarm Events Settings Configuring Relay WarningConfiguring Relay Event Types Activate your settingsOverride relay alarm settings Relay Alarm ListUsing Set Device IP Using Line-Swap-Fast-RecoveryConfiguring Line-Swap Fast Recovery Enable Line-Swap-Fast-RecoverySet up the connected devices Configuring Set Device IPMirror Port Using DiagnosisOutput data stream Bi-directionalPing Using MonitorMonitor by Switch Monitor by Port Using the MAC Address TableALL Using Event LogEDS Configurator GUI Broadcast Search Starting EDS ConfiguratorSearch by IP address Upgrade FirmwareModify IP Address Export Configuration Import Configuration Unlock Server EDS-726 Series User’s Manual MIB II.2 Interfaces Group MIB II.1 System GroupMIB II.4 IP Group MIB II.5 Icmp GroupMIB II.17 dot1dBridge Group MIB II.10 Transmission GroupMIB II.11 Snmp Group Private Traps Public TrapsInterface Modular Managed Switch System, EDS-72610GMechanical PowerGigabit Ethernet Interface Module, IM series Optical Fiber Fast Ethernet Interface Module, IM seriesInterface Regulatory Approvals EnvironmentalService Information Following services are provided Moxa Internet ServicesSerial Number Problem Report FormProduct Return Procedure