Moxa Technologies EDS-726 user manual Unlock Server

Page 88

EDS-726 Series User’s Manual

EDS Configurator GUI

4.Click on Yes in response to the following warning message to accept the new settings.

Unlock Server

The Unlock Server function is used to open a password protected switch so that the user can modify its configuration, import/export a configuration, etc. There are six possible responses under the Status column. The Status of an EDS-726 indicates how the switch was located (by MOXA EtherDevice Switch Configurator), and what type of password protection it has.

The six options are as follows (note that the term Fixed is borrowed from the standard fixed IP address networking terminology):

yLocked

The switch is password protected, “Broadcast Search” was used to locate it, and the password has not yet been entered from within the current Configurator session.

yUnlocked

The switch is password protected, “Broadcast Search” was used to locate it, and the password has been entered from within the current Configurator session. Henceforth during this Configurator session, activating various utilities for this switch will not require re-entering the server password.

yBlank

EDS-726 is not password protected, and “Broadcast Search” was used to locate it.

yFixed

EDS-726 is not password protected, and “Search by IP address” was used to locate it manually.

yLocked Fixed

EDS-726 is password protected, “Search by IP address” was used to locate it manually, and the password has not yet been entered from within the current Configurator session.

yUnlocked Fixed

EDS-726 is password protected, “Search by IP address” was used to locate it manually, and the password has been entered from within the current Configurator session. Henceforth during this Configurator session, activating various utilities for this EDS-726 will not require re-entering the server password.

Follow the steps given below to unlock a locked EDS-726 (i.e., an EDS-726 with Status “Locked” or “Locked Fixed”). Highlight the server (from the MOXA EtherDevice Switch list in the

Configurator window’s left pane), and then click on the Unlock toolbar icon , or select Unlock from the Configuration menu.

1.Enter the switch’s User Name and Password when prompted, and then click OK.

4-7

Image 88

Contents Moxa EtherDevice Switch EDS-726 Series User’s Manual First Edition, JulyTrademarks Copyright NoticeDisclaimer Table of Contents Chapter EDS Configurator GUI Introduction Package Checklist FeaturesOverview Industrial Networking CapabilityUseful Utility and Remote Configuration Recommended Software and AccessoriesGetting Started RS-232 Console Configuration 115200, None, 8, 1, VT100 Connection CautionEDS-726 Series User’s Manual Key Function Configuration by Telnet Console Configuration by Web Browser EDS-726 Series User’s Manual Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationPassword Switch NameSwitch Location Switch DescriptionPassword AccountAccessible IP Any host on a specific subnetwork can access the EDS-726Any host can access the EDS-726 Allowable Hosts Input formatEnable PortDescription NameNetwork Port Transmission SpeedFDX Flow Control Port TypeAuto IP Configuration Switch IP AddressSwitch Subnet Mask Default GatewayTime Current TimeCurrent Date System Up TimeSystem File Update-By Remote Tftp System File Update-By Local Import/Export System File Update-By CF Card Using Port TrunkingFactory Default Port Trunking Concept Configuring Port Trunking Setting Description Trunk Group Maximum of 4 trunk groupsTrunk Type Member Ports/Available PortsConfiguring Snmp SnmpSnmp Read/Write Settings Snmp VersionsV1, V2c Read Community V1, V2c Write/Read CommunityTrap Settings Trap Server IP/NameUsing Communication Redundancy Switch Object IDPrivate MIB information Gigabit Ethernet Redundant Ring Capability 300 msInitial Setup Turbo Ring ConceptWhen the number of EDS-726 units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept What is STP? STP Requirements How STP WorksPort Speed Path Cost 802.1D Edition 802.1w-2001 STP Configuration STP ReconfigurationDifferences between Rstp and STP STP CalculationUsing STP on a Network with Multiple VLANs STP ExampleConfiguring STP/RSTP Forwarding Delay Root/Not RootProtocol of Redundancy Bridge priorityConfiguration Limits of RSTP/STP Enable STP per PortPort Priority Port CostUsing Traffic Prioritization What is Traffic Prioritization?Traffic Prioritization Concept How Traffic Prioritization WorksIeee 802.1p Priority Level Ieee 802.1D Traffic Type Differentiated Services DiffServ Traffic MarkingTraffic Prioritization QoS Classification Configuring Traffic PrioritizationTraffic Queues Default Port Priority Queuing MechanismInspect TOS Inspect COSCoS Mapping Setting Description FactoryTOS/DiffServ Mapping What is a VLAN? Using Virtual LANVirtual LAN Vlan Concept VLANs and Moxa EtherDevice Switch Benefits of VLANsManaging a Vlan Communication Between VLANsSample Applications of VLANs using Moxa EDS-726 HUBConfiguring 802.1Q Vlan Vlan Port SettingsManagement Vlan ID Port PvidPort Fixed Vlan List Tagged Port Forbidden Vlan ListUsing Multicast Filtering What is an IP Multicast?Concept of Multicast Filtering Benefits of MulticastMulticast Filtering Network without multicast filteringMulticast Filtering and Moxa EtherDevice Switch Igmp Internet Group Management Protocol Snooping ModeQuery Mode Igmp Multicast FilteringConfiguring Igmp Snooping Igmp Snooping SettingsStatic Multicast MAC Enabling Multicast FilteringIgmp Snooping Static Multicast Router PortQuerier Igmp TableAdd Static Multicast MAC Add New Static Multicast Address to the ListNone Join PortConfiguring Gmrp Port Setting Description Factory DefaultGmrp enable Setting Description Factory Default Port Mode Setting Description Factory DefaultUsing Bandwidth Management Configuring Bandwidth ManagementGmrp Table Broadcast Storm ProtectionUsing Port Access Control Traffic Rate Limiting SettingsIeee Static Port LockMessage Exchange Configuring Ieee 802.1XDatabase Option Radius ServerServer Port Shared KeyLocal User Database Setup 802.1X Re-Authentication802.1X Re-Authentication Static Port Lock Local User Database Setup802.1X Table Configuring Email Warning Using Auto WarningEmail Alarm Events Settings MoxaEtherDeviceSwitch0001@SwitchLocation Event TypesSystem Event Port EventEmail Settings Configuring Relay Warning Relay Alarm Events SettingsConfiguring Relay Event Types Activate your settingsRelay Alarm List Override relay alarm settingsUsing Line-Swap-Fast-Recovery Using Set Device IPConfiguring Line-Swap Fast Recovery Enable Line-Swap-Fast-RecoveryConfiguring Set Device IP Set up the connected devicesUsing Diagnosis Mirror PortOutput data stream Bi-directionalMonitor by Switch Using MonitorPing Using the MAC Address Table Monitor by PortUsing Event Log ALLEDS Configurator GUI Starting EDS Configurator Broadcast SearchUpgrade Firmware Search by IP addressModify IP Address Export Configuration Import Configuration Unlock Server EDS-726 Series User’s Manual MIB II.1 System Group MIB II.2 Interfaces GroupMIB II.4 IP Group MIB II.5 Icmp GroupMIB II.11 Snmp Group MIB II.10 Transmission GroupMIB II.17 dot1dBridge Group Public Traps Private TrapsModular Managed Switch System, EDS-72610G InterfaceGigabit Ethernet Interface Module, IM series PowerMechanical Fast Ethernet Interface Module, IM series Optical FiberInterface Environmental Regulatory ApprovalsService Information Moxa Internet Services Following services are providedProblem Report Form Serial NumberProduct Return Procedure