Moxa Technologies EDS-726 Trunk Group Maximum of 4 trunk groups, Trunk Type, Trunk Table

Page 30

EDS-726 Series User’s Manual				Featured Functions
	Trunk Group (Maximum of 4 trunk groups)

	Setting		Description		Factory Default
	Trk1, Trk2, Trk3, Trk4		Display or designate the Trunk Type and Member		Trk1
			Ports for Trunk Group 1, 2, 3, or 4.
	Trunk Type
	Setting		Description		Factory Default
	Static		Designated Moxa proprietary trunking protocol		Static
	LACP		Designated LACP (IEEE 802.3ad, Link		Static
	LACP		Aggregation Control Protocol)
			Aggregation Control Protocol)
	Member Ports/Available Ports
	Setting		Description		Factory Default
	Member/Available		Use Up/Down buttons to add/remove specific ports		N/A
	Ports		from available ports to/from trunk group.
	Check box	Check to designate which ports to add or remove.			Unchecked
	Port		Port number		N/A
	Port description		Displays the media type for each module’s port		N/A
	Name		Max. 63 Characters		N/A
	Speed		Indicates the transmission speed (100M-Full,		N/A
	Speed		100M-Half, 10M-Full, or 10M-Half)
			100M-Half, 10M-Full, or 10M-Half)
	FDX Flow Control		Indicates if the FDX flow control of this port is		N/A
	FDX Flow Control		“Enabled” or “Disabled.”
			“Enabled” or “Disabled.”
	Up		Add designated ports into trunk group from		N/A
	Up		available ports.
			available ports.
	Down		Remove designated ports from trunk group to		N/A
	Down		available port.
			available port.

Trunk Table

Setting	Description
Trunk Group	Displays the Trunk Type and Trunk Group.
Member Port	Display which member ports belong to the trunk group.
Status	Success means port trunking is working properly.
	Fail means port trunking is not working properly.
	Standby means port trunking is working as a standby port. When there
	are more than eight ports trunked as a trunking group, the 9th port will
	be the standby port.

3-15

Image 30

Contents Moxa EtherDevice Switch EDS-726 Series User’s Manual First Edition, JulyCopyright Notice TrademarksDisclaimer Table of Contents Chapter EDS Configurator GUI Introduction Overview Package ChecklistFeatures Industrial Networking CapabilityUseful Utility and Remote Configuration Recommended Software and AccessoriesGetting Started RS-232 Console Configuration 115200, None, 8, 1, VT100 Connection CautionEDS-726 Series User’s Manual Key Function Configuration by Telnet Console Configuration by Web Browser EDS-726 Series User’s Manual Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationSwitch Location PasswordSwitch Name Switch DescriptionPassword AccountAny host can access the EDS-726 Accessible IPAny host on a specific subnetwork can access the EDS-726 Allowable Hosts Input formatDescription EnablePort NameFDX Flow Control NetworkPort Transmission Speed Port TypeSwitch Subnet Mask Auto IP ConfigurationSwitch IP Address Default GatewayCurrent Date TimeCurrent Time System Up TimeSystem File Update-By Remote Tftp System File Update-By Local Import/Export Using Port Trunking System File Update-By CF Card Factory Default Port Trunking Concept Configuring Port Trunking Trunk Type Setting DescriptionTrunk Group Maximum of 4 trunk groups Member Ports/Available PortsConfiguring Snmp SnmpV1, V2c Read Community Snmp Read/Write SettingsSnmp Versions V1, V2c Write/Read CommunityTrap Settings Trap Server IP/NamePrivate MIB information Using Communication RedundancySwitch Object ID Gigabit Ethernet Redundant Ring Capability 300 msInitial Setup Turbo Ring ConceptWhen the number of EDS-726 units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept What is STP? How STP Works STP RequirementsPort Speed Path Cost 802.1D Edition 802.1w-2001 Differences between Rstp and STP STP ConfigurationSTP Reconfiguration STP CalculationUsing STP on a Network with Multiple VLANs STP ExampleConfiguring STP/RSTP Protocol of Redundancy Forwarding DelayRoot/Not Root Bridge priorityPort Priority Configuration Limits of RSTP/STPEnable STP per Port Port CostTraffic Prioritization Concept Using Traffic PrioritizationWhat is Traffic Prioritization? How Traffic Prioritization WorksDifferentiated Services DiffServ Traffic Marking Ieee 802.1p Priority Level Ieee 802.1D Traffic TypeTraffic Prioritization Configuring Traffic Prioritization QoS ClassificationTraffic Queues Inspect TOS Default Port PriorityQueuing Mechanism Inspect COSSetting Description Factory CoS MappingTOS/DiffServ Mapping Using Virtual LAN What is a VLAN?Virtual LAN Vlan Concept Managing a Vlan VLANs and Moxa EtherDevice SwitchBenefits of VLANs Communication Between VLANsSample Applications of VLANs using Moxa EDS-726 HUBConfiguring 802.1Q Vlan Vlan Port SettingsPort Fixed Vlan List Tagged Management Vlan IDPort Pvid Port Forbidden Vlan ListConcept of Multicast Filtering Using Multicast FilteringWhat is an IP Multicast? Benefits of MulticastMulticast Filtering Network without multicast filteringQuery Mode Multicast Filtering and Moxa EtherDevice SwitchIgmp Internet Group Management Protocol Snooping Mode Igmp Multicast FilteringStatic Multicast MAC Configuring Igmp SnoopingIgmp Snooping Settings Enabling Multicast FilteringQuerier Igmp SnoopingStatic Multicast Router Port Igmp TableNone Add Static Multicast MACAdd New Static Multicast Address to the List Join PortGmrp enable Setting Description Factory Default Configuring GmrpPort Setting Description Factory Default Port Mode Setting Description Factory DefaultGmrp Table Using Bandwidth ManagementConfiguring Bandwidth Management Broadcast Storm ProtectionIeee Using Port Access ControlTraffic Rate Limiting Settings Static Port LockMessage Exchange Configuring Ieee 802.1XServer Port Database OptionRadius Server Shared Key802.1X Re-Authentication Local User Database Setup802.1X Re-Authentication Local User Database Setup Static Port Lock802.1X Table Using Auto Warning Configuring Email WarningEmail Alarm Events Settings System Event MoxaEtherDeviceSwitch0001@SwitchLocationEvent Types Port EventEmail Settings Configuring Relay Event Types Configuring Relay WarningRelay Alarm Events Settings Activate your settingsRelay Alarm List Override relay alarm settingsConfiguring Line-Swap Fast Recovery Using Line-Swap-Fast-RecoveryUsing Set Device IP Enable Line-Swap-Fast-RecoveryConfiguring Set Device IP Set up the connected devicesOutput data stream Using DiagnosisMirror Port Bi-directionalUsing Monitor Monitor by SwitchPing Using the MAC Address Table Monitor by PortUsing Event Log ALLEDS Configurator GUI Starting EDS Configurator Broadcast SearchUpgrade Firmware Search by IP addressModify IP Address Export Configuration Import Configuration Unlock Server EDS-726 Series User’s Manual MIB II.4 IP Group MIB II.1 System GroupMIB II.2 Interfaces Group MIB II.5 Icmp GroupMIB II.10 Transmission Group MIB II.11 Snmp GroupMIB II.17 dot1dBridge Group Public Traps Private TrapsModular Managed Switch System, EDS-72610G InterfacePower Gigabit Ethernet Interface Module, IM seriesMechanical Fast Ethernet Interface Module, IM series Optical FiberInterface Environmental Regulatory ApprovalsService Information Moxa Internet Services Following services are providedProblem Report Form Serial NumberProduct Return Procedure